久久wwww,国产精品一区二区免费看,免费国产h视频在线观看86

Where are the professional maintenance points for BYD imported battery forklifts?-

If you still have questions, you can consult the electric transport truck manufacturer

Electric: The electric motor is used as the power source and the battery is used as the energy source

However, although the electric lifting equipment produced by foreign manufacturers in the past was of good quality, it was too expensive to be popularized

In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

The electronic scale pallet truck is designed and developed for mobile weighing, combining cargo handling and weighing into one, and is suitable for use in the food industry

There is no problem with the normal use of lithium batteries, but even if the technical level of lithium batteries is high, there is still a small safety risk

It has the following features: small size, light weight, can travel and operate in very narrow passages, and can also enter floors and elevators with light loads; all of its control buttons are installed on the handle, and it also has functions such as lifting and horn, making it easy and convenient to operate

Electric transport trucks are powered by batteries, driven by DC motors, and advanced by hydraulic power units; they have the advantages of fast operation speed, small size, simple and flexible operation, and low noise

So what kind of places are suitable for our electric forklifts and where are they worth buying? Let our electric forklift manufacturers give us some direction (5) Readjustment of air gap: The rated air gap Z will increase due to wear

Do not start the forklift before the battery is fully charged

Where are the professional maintenance points for BYD imported battery forklifts?- Or you can directly call the forklift rental phone number to rent Manual pallet trucks are mainly used to carry pallets or directly carry goods, and both walking and lifting require manpower

Non-contact switches are used as much as possible, and cables are covered with special rubber skin to prevent hardening and deterioration

The speed should be reduced in narrow passages or curved roads

It is strictly prohibited to load and unload the counterbalanced forklift manually to avoid safety problems

Huge market segment space In the field of electric forklifts, the rapid growth and technological innovation of domestic electric walk-behind warehouse trucks have also been eye-catching, and have become an important "engine" driving the rapid growth of my country's forklift industry in recent years

This allows the forklift to reach a traction power of about 60kW, which is equivalent to the performance of a 100kW thermal engine, thus achieving an important milestone in performance

Pay attention to the driving system and whether the sound of the steering system is normal

If the driver does not understand, he can consult the electric transporter manufacturer

It is also necessary to practice more in daily work and accumulate experience

The net height in the container is required to be less than 2

They have the advantages of labor saving, energy saving, environmental protection, high efficiency, safety and reliability, and low noise

" Forklifts can generally be divided into three categories: internal combustion forklifts, electric forklifts and warehouse forklifts

Where are the professional maintenance points for BYD imported battery forklifts?-

If dust or other dirt is found, it should be cleaned in time

Since most internal combustion forklifts are used in ports, docks and working places, the environment in which they are used is relatively harsh, especially in the port and nursing industry

The cold resistance can reach minus 40°C, and it can work normally at high temperatures up to 60°C

Among them, the maximum spacing between the 4 oil cylinders exceeds 1

Because the electric transport truck is a very common warehouse electric pallet truck, it can be seen in many occasions So, how wide should the passage be reserved to make the best use of the factory? The electric forklift manufacturer will explain it in detail First, the altitude of the electric forklift workplace should not exceed 1200m Their application in the forklift industry will definitely have a strong impact on the original forklift market structure

The basic operation of an electric truck is to raise and lower the forks, and move the vehicle forward and backward

Turn the accelerator forward to move the forklift forward, turn the accelerator backward to move backward, and return the accelerator to the middle position to stop

The electrical parts and connectors must be arranged inside, and protective covers can also be added

However, there are also some key points that need to be paid attention to during operation

Slow down early when changing

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info