●精品国产综合乱码久久久久,国产精品久久久久久亚洲毛片,久久久久久精

BYD Food Factory Special Forklift Operation Guide- When driving on a larger slope allowed, the operator must keep the cargo on the counterbalanced electric forklift and slow down at the same time, and never accelerate

Clean the mud and other attachments on the outer shell regularly to avoid interfering with heat dissipation

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

Unlike internal combustion forklifts, electric forklifts are recommended to be used on hard, flat surfaces

Line electric flatbed trucks, rail large tractors, railway line flatbed trucks and other low-voltage rail electric flatbed trucks, all-electric trucks, electric flatbed trucks and other electric trucks

Longer service life: The power module is made of imported high-quality lithium batteries, chargers and controllers, and is made of one-time injection molding technology

As a short-distance cargo transportation vehicle, they often carry heavy cargo

The longer joystick greatly reduces the steering force and makes the operation easier

Consider the needs of the standard forklift first

First, the altitude of the electric forklift workplace should not exceed 1200m

jointly established Anhui Wanxin Motor Co

The net height in the container is required to be less than 2 When the gap between the main bearing and the journal is too large, the front and rear oil seals will leak oil at the crankshaft head or the clutch due to sealing loss, causing the electric pallet truck friction plate to be contaminated and slip

Moreover, it is also easy to maintain, and even if it encounters a malfunction and needs to be repaired, it can be easily solved

BYD Food Factory Special Forklift Operation Guide-

(7) When a forklift is operating, no one is allowed to stand on the forks

Strengthen safety management at the work site

The plate is a very important part of the battery

Lead-acid batteries are heavy, large, and of low quality, especially the charging and discharging requirements are very strict

Turn on the key switch

It takes a certain amount of time to load and unload goods, and it consumes manpower, is inefficient, and prolongs its usage time

If there is condensed water on the surface of the vehicle, drying measures must be taken or the condensed water must be dried before entering the cold storage

It has the advantages of small size, light weight, high efficiency and long life; 2

2 When entering and leaving factories, workshops, and warehouses, the speed should not exceed 5km/h

For example, the forklift is equipped with a 540Ah battery

Battery capacity: 80V/700Ah 5

BYD forklift solutions in cold chain logistics: Cold chain logistics handling equipment has the most obvious requirements for low temperatures

BYD Food Factory Special Forklift Operation Guide- The skyrocketing order size has put higher demands on warehousing and logistics

Among them, the lifting height is detected by a pull rope encoder

When the forklift battery is running out of power, it must be charged in time, and it must be parked in the charging area for charging

Therefore, when purchasing an electric transport truck, it is not enough for companies to only compare the price of the forklifts

AGV is applied to forklifts, and the AMS automated management system, AGV hardware equipment and management system (NDC) are established to build a full-process logistics management system, realize dynamic monitoring of warehouse goods, and realize the traceability and visualization management of logistics transportation Customers are not allowed to disassemble and adjust the motor stator components without permission

Combination of forklift and unmanned warehousing With the advent of the information age, unmanned intelligent warehousing has gradually developed, and this technology will become the mainstream concept for the development of logistics equipment in the future

During operation, the outriggers cannot penetrate the bottom of the goods, and the mast can move along the track inside the outriggers with the entire lifting mechanism It is understood that the battery production base of Xin Power now uses the latest fully automated production line, which has the characteristics of high precision, high speed, and high intelligence, to ensure the precise control of intelligent automation during the battery production process and to ensure the consistency requirements of battery production Currently, most electric transport trucks on the market use lead-acid batteries, while some use other types of batteries such as lithium batteries

Huge market segment space In the field of electric forklifts, the rapid growth and technological innovation of domestic electric walk-behind warehouse trucks have also been eye-catching, and have become an important "engine" driving the rapid growth of my country's forklift industry in recent years

If necessary, add 45# hydraulic oil The manual trucks produced by electric truck manufacturers also have these special advantages: thickened high-carbon steel plates have stronger load-bearing capacity and longer life; upgraded rubber-coated handles make operation more comfortable and labor-saving; high-quality casters are used, which are quiet and wear-resistant; and automatically welded forks are not easy to deform and are stronger

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info