91香蕉视频在线观看,亚洲先锋影音,99久久国产视频

What to do if BYD explosion-proof forklift does not move forward or backward?- When moving, the fork brings the goods back so that the center of gravity of the goods is within the support surface BYD forklifts have performed well in this field of operation and have become a product favored by many logistics enterprise users

Before lifting the forklift, make sure that the forklift has completely penetrated the bottom of the pallet

Easy to operate: The explosion-proof electric forklift is driven by a hydraulic system

In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

Fault 3: Slow lifting speed or failure to lift Generally, it is because the oil tank is low in oil, and hydraulic oil needs to be added in time or replaced directly

The speed should be reduced in narrow passages or curved roads

Then check carefully to determine the crack boundary, and drill a ￠5-￠8mm limit hole 10mm beyond the boundary

After no abnormality is found, the fork is extended to pick up the goods 2

Therefore, if the damage is serious, it is recommended not to continue using it and directly recycle the forklift

In terms of design, care should be taken to avoid accumulation of water vapor or dust

What to do if BYD explosion-proof forklift does not move forward or backward?- The prices of electric forklifts on the market range from high to low

Therefore, the demand for cold chain products in the market has increased year by year, and a variety of fresh-keeping and frozen products that meet people's consumption needs have also appeared

7Work cycle time Automatically guide the electric truck to complete the work cycle time required

1*1

Forklift A large amount of energy is recovered during braking (70% electric and 30% hydraulic), and the improved energy regeneration function leads to lower electricity costs

Due to the differences in the level of scientific and technological strength of various countries, there are also great differences in the application of new energy in forklifts

When the vehicle is moving, do not mistake the "forward" and "reverse" direction buttons for the turn buttons; 6

For three-dimensional storage based on unmanned forklifts, the safety inspection is mainly considered from two aspects: the vehicle body itself and the loading device connected to the vehicle body 6 Power Management: Equipped with the world's leading power management system to monitor the battery in real time, perform high-precision calculations on the charge status, ensure that the battery is always working in a safe state, and increase the battery cycle Freight is also very convenient, the body is agile, and most importantly, it is very environmentally friendly

③ Check the wear of the brushes in the hydraulic pump motor and replace any brushes that may not meet the requirements to maintain good contact

The integrated truck design has higher strength

What to do if BYD explosion-proof forklift does not move forward or backward?-

Types of forklift wheels: Forklifts are basically divided into drive wheels, load-bearing wheels, and auxiliary wheels

The special low-temperature working environment of the cold storage will have many impacts on the normal operation of the forklift 3

The skyrocketing order size has put higher demands on warehousing and logistics

5 The electric hydraulic transport truck slowly moves away

The price of imported forklift products is slightly higher

Can electric forklifts replace internal combustion forklifts? In order to expand the scope of use of electric forklifts, a large European forklift manufacturer has tried every means to improve the traction performance of electric forklifts, hoping to reduce energy consumption while making them comparable to fuel-powered forklifts in terms of power, and to meet the needs of forklifts operating in different occasions, with more intelligent applications and increased safety

Braking (1) When the operating arm moves to the uppermost or lowermost end, the forklift is electrically braked

It involves a whole set of software matching and service support

It has the following features: small size, light weight, can travel and operate in very narrow passages, and can also enter floors and elevators with light loads; all of its control buttons are installed on the handle, and it also has functions such as lifting and horn, making it easy and convenient to operate The system has different power modes, which allows the vehicle to flexibly give full play to its characteristics under various loads, improve energy utilization efficiency, and be more energy-saving and environmentally friendly

(6) It is prohibited to pick up goods with a fork at high speed or to use the fork to collide with hard objects

The pole coil is made of F-class insulation copper core wire and soaked in F-class three-proof paint

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info