中文字幕在线免费播放,热99精品只有里视频最新,亚洲日本韩国一区

BYD all-electric forklift operation video- 5 Finally, you also need to consider the brand, after-sales service, cost-effectiveness, etc It can be seen that the application of 5G Internet of Things technology has realized the informatization, transparency and intelligence of the entire logistics Among them, Zhejiang Hangcha Intelligent Technology Co

AC drive motor, without carbon brush, basically requires no maintenance, reducing maintenance costs

Their performance and reliability need to match the freezing and refrigeration technology (4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same Forklifts originated in the United States, flourished in Japan, started late in China, but have developed rapidly 2, Ltd When starting the forklift or reversing, pay attention to the surrounding environment

Steering 1 Stay away from forklift operation areas (including the rack centralized placement area), specifically: (1) Do not take shortcuts and go directly through the forklift operation area; (2) Do not take a rest in the gap between the racks because you are tired; (3) When working with suppliers to confirm and inspect parts, do not use the forklift operation area for convenience

BYD all-electric forklift operation video- During operation, the outriggers cannot penetrate the bottom of the goods, and the mast can move along the track inside the outriggers with the entire lifting mechanism If you directly charge a battery with frozen electrolyte, it may explode 2-week inspection Forklift users should spend a few minutes each week cleaning the machine, paying special attention to removing any entanglements such as silk, linen, and rags around the wheels and axles

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area

5 to 5

The coping methods mainly include shot peening of metal structural parts, paint film strengthening treatment, and rust prevention of bolts, nuts and machine pins

But do you know how to choose the equipment that suits you? Next, the electric forklift manufacturer will lead you to understand how to choose a 3-ton electric forklift The key parameters of unmanned forklifts involved in this article are shown in Table 1: Among them, in order to effectively reduce the width of the stacking channel, the minimum stacking channel width was reduced from the traditional 3 meters to 1

3 semi-annual inspection ①Apply lubricating oil to the lifting chain and check the wear of the chain

Finally, the fork is retracted and the loading platform falls back to the low position

Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging

The cold resistance reaches minus 40℃, and it can work normally under high temperature to 60℃

(2) When the direction switch is turned to the reverse position during normal operation, the electric brake function can be executed

5 meters

1-day inspection ① Check whether the battery is fully charged (you can also check the side surface of the battery)

BYD all-electric forklift operation video-

If you want to buy a cost-effective electric transporter with low price, good quality and good service, you should first refer to the production strength of the manufacturer

It can also enter the cabins, carriages and containers to load and unload and transport palletized goods At the same time, it has many years of experience in non-standard design and industry-customized design

The air gap can be adjusted multiple times

Loading and unloading issues of electric pallet trucks: 1

However, for the above-mentioned forklifts equipped with safety monitoring devices, the regular (initial) inspection shall include the corresponding items

There is a tortoise and rabbit regulator on the handle, and the tortoise speed and rabbit speed can be switched freely

Therefore, the use of explosion-proof electric forklift in specific occasions is necessary, and safe operation measures are also indispensable The vehicle moves backwards

This puts higher demands on the product line layout, product design and technological innovation capabilities of related companies, such as achieving lighter weight, better load-bearing capacity and higher cost-effectiveness through lightweight design

(4) Hydraulic distribution valve, which consists of a valve body, a lifting hydraulic cylinder valve core, a tilting hydraulic cylinder valve core and a safety valve

The operator must understand the condition of the vehicle before using it, and must not allow unsupervised personnel to operate it at will; therefore, when using an electric transport truck, it is necessary to use it in a standard manner, and at the same time it is necessary to pay attention to its protection and maintenance to extend its service life

When driving with loads, if the forks are raised too high, the overall center of gravity of the forklift will increase, affecting the stability of the forklift

An electric forklift is a dual-purpose electric forklift with loading and unloading functions and short-distance transportation functions

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info