国产精品一区三区,亚洲国产精品久久91精品,国产日韩欧美中文

What are the maintenance contents of BYD new energy forklift?- In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo Of course, practice makes perfect, but it also takes time Under the same battery capacity, the communication system will last longer; currently, most of the equipment used in logistics distribution centers, warehouses, workshops, etc Before entering the cold storage, please operate the hydraulic and travel movements until the temperature of each component rises before entering the cold storage

When the chassis tilt exceeds the tolerance, the entire vehicle will issue an alarm signal and prohibit lifting operations

Below, the editor will briefly tell you how to prevent corrosion and rust on new energy forklifts

When the vehicle starts and the speed increases, keep the accelerator pedal steady

go ahead 1 The function of the outriggers is to ensure the stability of the forklift when loaded

The forklift in my country is the product of the evolution and merger of loaders and large-tonnage forklifts

China, as the world's most populous country, has a very low per capita cold storage area, and there is still huge potential for cold storage development (at a rate of more than 35%)

The truck is designed to be "Li-ion Ready" with its controller automatically identifying the battery chemistry (lithium-ion vs

Power battery products need to be safe, have high energy density and good high and low temperature performance, and they need to have high consistency

If necessary, adjust and clean the hydraulic oil valve

What are the maintenance contents of BYD new energy forklift?-

Is only horizontal transportation required, or is there stacking, picking, or sorting? Is the transported item special (barrel-shaped, such as in the paper industry)? The tonnage of the forklift required, the lifting height, the fork length, and the number of mast levels

When walking in the warehouse, pay attention to the dangers of forklifts, specifically: (1) When passing through an intersection or crossing a forklift lane, point and confirm; (2) When walking in the warehouse, do not talk on the phone or do other things that affect your concentration; 3 Both walking and lifting are achieved by manpower The latter requires manual pulling or pushing of the forklift, and the lifting is electric

Pallet trucks are common logistics and warehousing equipment on the market

" In the early 1920s, electric reach trucks were introduced, followed by forklifts with gasoline engines and lifting devices

He believes that, except for a few companies, the overall technical level of domestic lithium-ion forklifts is not high

A professional forklift operator must also have some professional professional qualities to cope with the handling work of warehousing, otherwise it is easy to cause accidents

(4) Turn the key switch to the off position

The advantages of easy operation, simplicity and high efficiency also make electric transport trucks quickly sell well in the market

The development of cold chain logistics has been raised to a national level and has become a major livelihood project, which is developing rapidly

Take BYD forklifts as an example

A heater should be installed in the cab

When driving on a larger slope allowed, the operator must keep the cargo on the counterbalanced electric forklift and slow down at the same time, and never accelerate ②The floating charging device effectively prevents overcharging

What are the maintenance contents of BYD new energy forklift?- It mainly includes inspection before use, inspection during work and maintenance after returning to the warehouse Below, the editor of BYD forklifts will tell you about some of its requirements during operation and loading and unloading

The system has different driving force modes, which allows the vehicle to flexibly give full play to its characteristics under various loads, improve energy utilization efficiency, and be more environmentally friendly and energy-saving

High-position side fork detection: Test the stability of the side fork at different loads, different side fork heights, and different fork entry speeds

The load capacity has been greatly improved compared to the traditional counterbalanced forklift AGV, with a rated load of up to 3

When replacing the hydraulic oil, make sure that the oil tank is clean, the oil is free of impurities, and the oil is sufficient

The vehicle moves backwards

The longer joystick greatly reduces the steering force and makes the operation easier

1-day inspection ① Check whether the battery is fully charged (you can also check the side surface of the battery)

Fork: To improve the efficiency of cargo storage and retrieval and reduce the width of the storage channel, this unmanned forklift is designed with a two-way telescopic fork to complete the cargo placement and retrieval by sideways fork entry

Clean the lifting chain, chain shaft and add lubricating oil

It is suitable for operations in workshops and warehouses

It is recommended to use them outdoors

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info