91短视频推广,影音先锋中文字幕影院,青青在线精品

BYD battery explosion-proof forklift fault code list - (12) When a forklift is carrying cargo downhill, it should drive in reverse to prevent the cargo from falling off Its significance is to tell buyers its ability to travel on raised ground or over foreign objects However, only superb technology is not enough

They can be used for stacking, loading and unloading, and handling goods in warehousing, machinery, chemicals, textiles, printing, logistics, and other industries

The forks are two forged forks bent at 90°, mounted on a sliding bracket, and are used to carry materials Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power There are specification restrictions for the use of electric pallet trucks and pallets

The driver has to stretch his neck to barely find the correct position based on experience! If it is not accurate, the goods will tip over

If it is inconvenient to tilt the mast backward for some special goods, the mast should be kept vertical and it is forbidden to tilt the mast forward during driving

Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model

The raised part will hit the timing gear on the camshaft, causing abnormal engine noise

In applications that require very low noise, it is recommended to readjust the air gap within the maximum air gap range

The installed warning lights and voice reminders and other functions keep safety around

BYD battery explosion-proof forklift fault code list -

2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

When turning the buttons, pay attention and do not turn violently and accelerate quickly Make sure to check your surroundings and drive slowly when turning; 2

Considering the needs of warehouse high-rise operations and the height of the warehouse, the lifting height of the forklift should be appropriately considered from the standard configuration of 3

The weight is gradually increased according to the load capacity of the prototype, and the lifting capacity and high-position side fork tests are performed under different loads

Safety of lithium battery forklifts

Key switch The function of this switch is to control the connection and disconnection of the circuit Therefore, it is easy to make mistakes when you have to twist your neck to check the reversing road conditions How to manage the transition period? (1) From December 1, 2023, all newly manufactured forklifts must be equipped with safety monitoring devices in accordance with the requirements of the new version of the regulations Of course, the most widely known name is forklift The minimum turning radius is crucial for calculating the width of the channel that the electric forklift can pass through

Electric forklifts are now very commonly used logistics and warehousing equipment

BYD battery explosion-proof forklift fault code list -

Later, my country's forklift manufacturer invented the Little King Kong through lightweight design, which rapidly reduced the cost of electric transport trucks

When choosing, enterprises should consider their own operating requirements, budget, working environment and other conditions comprehensively to choose the most suitable truck

When the battery electric flatbed truck is in operation, the most important thing is to maintain its battery

Common tonnages of manual trucks are 2 tons/2

It has low electrostatic induction power, strong anti-interference ability, and stable and reliable operation

Stable and reliable performance: reasonable internal circuit design, complete protection and low failure rate; 3

As people pay more attention to environmental protection, electric forklifts are gradually replacing internal combustion forklifts

Anti-slip measures in low temperature environments In low-temperature cold storage, forklifts can use special anti-skid tires

② Check and tighten any screws, nuts, and battery cable connections that may be loose

Slowly release your thumb, the direction and speed control buttons will automatically return to their original positions and the vehicle speed will decrease

Its weight is determined based on the rated lifting capacity of the forklift, and it plays a balancing role when the forklift is loaded

When there are obstacles or pedestrians on the route, the vehicle will automatically stop or give way, reducing the bumps and damage associated with handling, ensuring that the materials are transported to the designated location in good condition, and greatly reducing the uncertainty caused by manual forklifts

If you still have any questions about electric forklifts, it is recommended that you consult the electric forklift manufacturer

They are light, make a little noise, and have average wear resistance

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info