四虎国产精品永久,欧美性巨大欧美,亚洲色图一区二区

How to move a BYD pallet truck when it runs out of power?-

The steering operation is the same as the way we drive a car, and the forklift bearing and forklift fork can be controlled by the joystick

The application scenario guarantees the confidence of the product

Hydraulic system measures It is suitable for ordinary forklift lifting cylinders at room temperature

(10) It is not allowed to use the inertia of braking to release objects

?What are the advantages of BYD lithium battery forklifts? (1) Long life: Under normal charging and discharging conditions, after 4,000 cycles, the capacity retention rate is greater than 75%; the battery life can be maintained for more than 10 years; the forklift does not need to replace the battery during its life cycle

1-day inspection ① Check whether the battery is fully charged (you can also check the side surface of the battery)

Lithium batteries save more than 40% of electricity

Large-tonnage pallet trucks can reach 5-25 tons in China, which can meet the needs of large-tonnage cargo handling, stacking, loading and unloading, and freight

It is suitable for use in small spaces

Therefore, pharmaceutical warehousing and logistics have high safety performance testing plans for transportation equipment and high transportation efficiency

In terms of electric forklift product categories, in 2020, electric walk-behind warehouse forklifts accounted for the largest sales volume, accounting for 79%; followed by electric counterbalanced ride-on forklifts, accounting for 18%, and electric ride-on warehouse forklifts, accounting for 3%

Pay attention to the strength when turning the knob

Warm reminder: In addition to common models, non-standard customization can also be carried out according to the user's site, environment, cargo, and load to meet the needs of special environment

The safety distance is generally 200mm

(7) Check whether the tools and accessories on board are safe Inspection items during work: usually within 2 hours of work (1) Check the working condition of the engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperatures of the wheel axle, brake drum, transmission, torque converter, gear pump and drive axle are normal

How to move a BYD pallet truck when it runs out of power?- 4 It is strictly forbidden to stand above or below the forks, and it is not allowed to use a single fork to pick up goods that are too high to be loaded 3 What should I pay attention to when using an electric transport truck? What should I pay attention to when using an electric transport truck? Electric transport trucks are also called electric pallet trucks in the industry

Below, the editor of BYD forklifts will tell you about some of its requirements during operation and loading and unloading

Electric trucks use imported electronic controls, handles and other circuit control components and hydraulic components, and are relatively expensive

They are not affected by severe cold or hot environments, including working in some environments with poor lighting, etc

Finally, modular modeling is carried out through 3D software, and the rationality of the design is verified through prototype testing to ensure that the product has the advantages of narrow stacking channel, high storage efficiency, and high storage capacity rate

What are the advantages of BYD's new energy forklift? As we all know, the application of new energy technology has made great progress and its application field is also relatively wide

The models and configurations of the two equipment are different

This means that electric forklift manufacturers can obtain more energy and greater braking torque in actual use to achieve the purpose of speed operation

Adjust the height of the forks so that they are about 100mm-200mm from the ground

Warehouse forklift is a practical tool commonly used in warehouses

How to move a BYD pallet truck when it runs out of power?- In the future, the three types of vehicles will have more configurations and development

Before starting an electric forklift, you must check whether all parts are in good condition, and check the performance of all operating components and safety devices

Safety production education, You must drive with a license, and illegal operation is strictly prohibited

First check the fasteners of the electric pallet truck to see if the nuts are loose and whether the gaps between the parts are too large

In response to this, some companies should design vehicles according to the specifications of lithium batteries, making the vehicle more compact and more convenient to operate

When picking up materials from the loading area, the action flow is shown in Figure 1-(a)

Product Introduction: 1

The operator should maintain a wide field of vision when driving the counterbalanced forklift to avoid collision with obstacles

If you have the key, take it out and give it to the custodian of the electric vehicle

Nameplate of electric pallet truck The nameplate contains the vehicle model, rated lifting capacity, maximum lifting height, deadweight, and factory serial number

Prevent vehicles from carrying people; 7

The following is shared by the BYD Forklift Editor: In the field of industrial vehicles, BYD has made the greatest contribution to the application of lithium batteries in forklifts

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info