欧美成人亚洲高清在线观看,色8久久久久,中文字幕在线免费视频

When is the best time to charge BYD's forklift battery for manufacturing industry?-

The essential characteristics of lithium iron phosphate batteries and their relatively high safety and high efficiency have expanded the application scope and application space of BYD forklifts

Cab: Since most electric forklifts are used for indoor handling, there is no enclosed cab, and only a protective overhead guard is installed

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

are important factors affecting its price

The operator must stay away from non-staff members in the counterbalanced forklift's working area and immediately issue a warning if there is any danger

Overview Forklifts are industrial handling vehicles, which refer to various wheeled handling vehicles for loading and unloading, stacking and short-distance transportation of palletized goods

03Three

A higher service life represents lower use costs, plus savings in maintenance staff salaries and raw material costs

3 Before moving the forklift, you must check whether the brakes and batteries are fully charged 5

There is no need to replace easily damaged electronic parts, so electric forklifts are more economical

The electric transport truck has an ergonomically designed handle head, which is beautiful and simple

When is the best time to charge BYD's forklift battery for manufacturing industry?- The following is a brief sharing by BYD Forklift: Carry out seasonal maintenance of equipment, test the antifreeze freezing point, and make it 5℃ lower than the local minimum temperature; the thermostat opening temperature is about 82℃; the battery electrolyte density reaches 1

However, as the country's environmental protection requirements continue to increase, the market demand for diesel forklifts will gradually decrease in the future

Do not adjust parts during the operation of the equipment

Transportation and storage This all-electric stacker must be placed in a horizontal position during transportation and storage to prevent oil spillage

to maintain the stability of the forklift

(4) When turning, if there are pedestrians or vehicles nearby, you should signal and refrain from making sharp turns at high speeds

The electric transport truck has an ergonomically designed control handle, which is convenient for left-handed and right-handed operation and provides comfortable driving

Direct handling costs can be reduced by more than 25% compared to manual handling

Features: 1

12 The forklifts can adapt to the on-site environment through autonomous learning, automatically build maps, and plan appropriate routes to achieve flexible scheduling during the transportation process

The maximum operating current of the motor is 3 times the rated voltage, the allowable time is 1 minute (forward and reverse rotation is 30 seconds), and its output torque is 4

Do not adjust parts during the operation of the equipment

The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134

to maintain the stability of the forklift

When is the best time to charge BYD's forklift battery for manufacturing industry?-, which mainly engages in the research and development, manufacturing, sales, technical services and consulting of various electric vehicle motors; and jointly established ZF Heli Transmission Technology (Hefei) Co

610X Features ■ More compact Compact and practical design, the electric drive unit is easy to install, smaller in size and high in system reliability

However, since forklifts are mostly operated within the factory area, the operating intensity and environment are fixed, and the operating intensity is generally strong, many advantages of lithium batteries can be reflected in electric forklifts have emerged on a large scale 1

(4) Unmanned and intelligent Affected by the rapid development of intelligent manufacturing and smart warehousing, electric forklifts are also developing in the direction of unmanned and intelligent

They can prevent the occurrence of fire or explosion accidents caused by explosions to a certain extent, meet the explosion-proof requirements of different industries, and ensure the safety of personnel and equipment

The load should be in a low position when the electric forklift is moving, and the height of the fork from the ground should not exceed 300mm

It is also necessary to practice more in daily work and accumulate experience

BYD forklift provides a long 5-year warranty period for rechargeable batteries The company has more than 10 years of experience in the research and development and manufacturing of standard electric warehouse forklifts Because the chemical properties of lithium are very active, the processing, storage, and use of lithium are very demanding 2

Changing lead-acid battery forklifts to lithium battery forklifts is not a simple battery conversion

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info