久久精品导航,成人18精品视频,99久久综合

What are the requirements for maintenance of BYD electric palletizing forklifts?- The operator must stay away from non-staff members in the counterbalanced forklift's working area and immediately issue a warning if there is any danger

It is strictly forbidden to stand above or below the forks, and it is not allowed to use a single fork to pick up goods that are too high to be loaded

Nameplate of electric pallet truck The nameplate contains the vehicle model, rated lifting capacity, maximum lifting height, deadweight, and factory serial number

The reach truck is similar to the leg-type forklift in that the center of gravity of the goods falls within the support plane of the vehicle, so it has good stability

In 2020, benefiting from the rapid recovery of domestic industrial manufacturing from the epidemic, the overall production and sales of the forklift industry increased significantly

To break this situation, we must take the path of differentiated competition

"No cobalt" and "lower lithium content" complete the battery's environmental compatibility and significantly reduce waste disposal costs

Charge the battery in time

At present, electric transport trucks are widely used in shopping malls, airports, docks, warehouses, factories and other places Therefore, when companies choose batteries for electric transport trucks, they should pay attention to checking the anti-counterfeiting mark of the product, whether the quality assurance card, maintenance card, etc

Avoid closed areas, or maintain the ventilation and drainage performance of the closed system, open the ventilation window to maintain the heat dissipation and ventilation performance of the motor, open a leakage hole at the bottom of the battery box or install a reservoir

The outriggers are relatively high and have two wheels at the front end

? AC drive system, stepless speed regulation, safe, silent, emergency reverse device/emergency brake switch

What are the requirements for maintenance of BYD electric palletizing forklifts?-

Check the automatic gearbox system, replace the automatic gearbox and filter 5

If there is no abnormality during the retraction of the fork, after the fork returns to the middle position, in order to lower the center of gravity of the unmanned forklift, ensure the smooth and safe operation, and take into account the efficiency of cargo storage, the loading platform will fall back to 800mm above the ground

Rotate the travel button one after another to move the electric pallet truck backward (10) The forklift is steered by the rear wheels, so you must always pay attention to the swing of the rear wheel to avoid turning too sharply, which is common among beginner drivers Slowly accelerate to the ideal speed For example, for instruments with electric heating, waterproof connectors and electrical connector terminals are matched with rubber covers, and professional circuit routing is used to prevent water accumulation, so as to effectively deal with electrical faults caused by freezing and condensation

Next, let's see how to do it specifically

When the vehicle is moving, do not mistake the "forward" and "reverse" direction buttons for the turn buttons; 6

In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator

Mechanism and principle: 1

Electric pallet trucks are the main handling tools in warehousing and logistics

It takes some effort to choose a high-quality electric transport truck, and it is best to choose a large manufacturer with a well-known brand

Therefore, it is very necessary to check and deal with these minor problems

warn! Wheel slip is not allowed

What are the requirements for maintenance of BYD electric palletizing forklifts?- The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced Oil replacement in hydraulic system We recommend that you replace the hydraulic oil once the machine is in operation (or when the operation time reaches 2000 hours), using 45# high-strength hydraulic oil or similar oil

It mainly includes inspection before use, inspection during work and maintenance after returning to the warehouse

The driver must study it carefully

Hangcha Group, a leading domestic private forklift company, also launched electric forklift products at almost the same time

Forklift maintenance Forklift battery cannot be charged The reason why the forklift battery cannot be charged may be that the connector is not connected properly, so we just need to connect it firmly

The vehicle cannot be accelerated for a long time; 4

8Transportation Types Type of raw materials shipped

If it is inconvenient to tilt the mast backward for some special goods, the mast should be kept vertical and it is forbidden to tilt the mast forward during driving

In terms of the sturdiness of the pallet, the nine-leg and Sichuan-shaped pallets are most suitable for electric transport trucks

In addition to Zhongli, companies such as Noli, Ningbo Ruyi, and BYD Forklift have also made good progress in the electric walk-behind warehouse truck market segment, and are constantly seeking innovative breakthroughs in structural design optimization, load capacity, ergonomics, and easy maintenance

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info