国产精品二区不卡,日韩啪啪电影网,亚洲第一se情网站

<ul id="6yoq2"></ul>

Product

Select a product to view

BYD Forklift

Core Features

BYD forklifts can easily handle any working conditions

High security

Turning speed limit Hill climbing protection Overload protection

high performance

Fast driving speed, fast lifting speed, strong climbing ability

High efficiency

Fast charging, power saving, multi-shift operation

High Match

Relying on the company's advanced battery, motor, electronic control, hydraulic system and other core technologies to create the ultimate vehicle performance

Low overall cost

Five-year data shows that detailed statistics on maintenance costs, operating costs, purchase costs, etc. can save 80% of costs compared to fuel forklifts and 30% of costs compared to lead-acid battery forklifts.

Super fast charging

Through disruptive battery and fast charging technology, charging time can be shortened by 90%, reducing waiting time, improving efficiency and creating unlimited battery life

Ultra-long life

BYD lithium battery has a capacity retention rate of more than 65% after 4,000 cycles of charge and discharge under normal charge and discharge conditions, and no battery replacement is required during the life cycle.

No charging room required

No need for charging room No need to add electrolyte No need for backup battery Change the forklift management mode and cope with various working environments calmly

BYD Forklift Repair Shop-

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

Therefore, pharmaceutical warehousing logistics has high safety performance requirements for handling equipment and high handling efficiency requirements

Is only horizontal transportation required, or is there stacking, picking, or sorting? Is the transported item special (barrel-shaped, such as in the paper industry)? The tonnage of the forklift required, the lifting height, the fork length, and the number of mast levels

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area

If the driving control switch is loose and causes failure, lock it in time

Since the unmanned forklift is very flexible, it can make full use of the existing space and site for transportation work when there are no obstacles on the ground

An electric forklift with excellent quality and simple operation is also very important

It has high storage efficiency and strong scenario applicability, but the cost is relatively high

5Minimum turning radius

The whole vehicle structure is shown in Figure 2

When welding, the electrode should be inclined 20°-30° in the direction of movement

There are many specific maintenance methods

What are the main considerations when choosing a pallet for an electric transport truck? We first need to consider the specifications and dimensions of the goods, such as the size of the outer packaging of the goods, the way it is placed on the pallet, and the weight and height of the goods The timer and power meter are standard to remind the operator to charge at the right time

Take BYD forklifts as an example

BYD Forklift Repair Shop-

The second reason is that the charging and discharging current is too large, and the plate is twisted and deformed

In the production of circuits and parts, some manufacturers use inferior accessories to reduce costs

When driving outdoors, the speed should not exceed 10km/h

Warehouse work is increasingly inseparable from 3-ton electric forklifts, because the introduction of electric equipment will greatly improve work efficiency and save costs

Manual trucks use a manual hydraulic pump to lift and lower the equipment through manpower, while electric trucks use a power source battery, a drive motor, and a drive wheel to achieve lifting and lowering

A heater should be installed in the cab

When the diodes in the two leftmost grids flash alternately, it means that the power is low and the battery needs to be charged

5 times the rated torque

In summary, the synchronization of the mechanical structures of the four cylinders is finally achieved

Electric transport forklift manufacturers emphasize that the maintenance cost of electric forklifts is very important for the normal life cycle, otherwise the battery is not powerful and the progress of the work is affected 3

5 meters, and the stroke of a single oil cylinder exceeds 1

As the name suggests, an electric transport truck is a forklift that is powered by electricity

When using lifting equipment to lift a counterbalanced electric forklift, ensure that the lifting equipment is loaded with the required capacity

BYD Forklift Repair Shop- Power The forklift is powered by the battery to drive the traveling motor and lifting motor

The S2

The same is true for food logistics

As the name implies, electric hydraulic forklifts are storage and logistics equipment suitable for warehouse operations

The beetle design of the fork reduces the wear of the loading and unloading tools during the loading and unloading process

The third type of vehicle is actually electric moving, which is mainly divided into electric pallet trucks and electric pallet stackers

The requirements of the logistics industry for the forklift industry are high strength, long service time, large load, stable performance, high degree of automation and intelligence, and low noise

When maintaining an explosion-proof electric forklift, you should follow strict maintenance regulations, use the correct lubricating oil, and check each component of the forklift to ensure the safe and reliable operation of the equipment

The market demand for electric forklifts will grow faster and faster, and the market share of electric forklifts will grow larger and larger

Use of charger ①The charger we equip for stacker trucks has excellent constant current characteristics and extremely fast overcurrent protection capabilities

When the rated nominal voltage is 1

However, one thing that cannot be ignored is that the difference between manual pallet trucks and electric hydraulic trucks is that they are pulled by human power, which consumes a lot of manpower, especially on uneven ground, which is more labor-intensive and has low handling efficiency Use both hands to push the control handle backward to between 0°-90°

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info