久操国产精品,久久视频一区,国产精品国产一区二区

BYD Forklift Stacker Precautions- When the inspection agency conducts regular (initial) inspections, the inspection items should include the inspection of safety monitoring devices

What are they? Common power system failures are mainly manifested in failure to charge, charging voltage is too low, and charging voltage is too high

If any abnormal condition is found in the forklift, stop and check it immediately

This idea is too one-sided

5 The body design of the electric transport truck is suitable for the workplace and has a good service life The emergence of lithium battery forklifts is a general trend Electric truck manufacturers tell you that this is not only for the safety of the driver, but also to maintain the battery of the electric pallet truck and prevent shortening the battery life

How to maintain and repair BYD forklifts? Daily maintenance is mainly about cleaning the forklift and external inspection

In summary, the synchronization of the mechanical structures of the four cylinders is finally achieved

The hydraulic pump outputs high-pressure oil (6

Whether it is lead-acid batteries or lithium batteries, electric transport truck manufacturers can provide them to everyone, and recommend the most suitable electric transport truck and batteries that match it according to the company's own needs

For transport trucks, there is only one size of fork legs, wide, narrow, long, short, single wheel or double wheel

Compared with internal combustion forklifts, it is closer to the violation we are advocating now, and the noise is also very small

BYD Forklift Stacker Precautions-

Why do forklifts still rust even though they follow the correct use and maintenance methods? Is it because the forklift is of poor quality? In fact, there are many reasons for forklift corrosion

(9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading

(2) Turn the key switch to the on position

Therefore, correct maintenance has become more important, and companies and drivers need to pay more attention

In life, we think whether electric forklifts are worth buying is a very objective question

It mainly includes inspection before use, inspection during work and maintenance after returning to the warehouse

Turn on the key switch

Wherever I went, I saw that most of the products produced by the manufacturers were similar

Use a jack to lift up the entire forklift, then place wood under it and pay attention to safety

They are equipped with a variety of protection devices such as emergency contact safety devices, automatic alarm devices, emergency stop button devices and object detectors, which can avoid injuries to workers and damage to warehouses, other equipment and buildings, and reduce work risks Lithium batteries are widely used in a wide range of fields

The market demand for electric forklifts will grow faster and faster, and the market share of electric forklifts will grow larger and larger

Before entering the cold storage, please operate the hydraulic and travel movements until the temperature of each component rises before entering the cold storage 10

BYD Forklift Stacker Precautions-

Below, the BYD forklift editor will tell you how to operate a BYD forklift

The tension of the two lifting chains should be even, without distortion, the ends should be firmly connected, and the pitch of the chain should not exceed 4% of the original length, otherwise the chain should be replaced

When using a reach truck, special attention should be paid to timely charging and proper maintenance of the battery

After AGV technology is widely used in counterbalanced forklifts, the performance of this type of vehicle has been greatly improved

When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down

In 2020, the sales volume of electric forklifts in China's forklift manufacturing industry reached 410,300 units, a year-on-year increase of 37 The all-electric transport trucks of electric forklift manufacturers have the following advantages: the imported rims used for the load-bearing wheels are more durable; the optional side arm guards are safer and more reliable; the advanced Hall sensors replace the traditional micro switches; the wheels are made of imported polyurethane, suitable for various ground surfaces, and can travel quietly; the reverse emergency forward button is installed to improve the anti-collision safety factor; the handle design is ergonomic and more comfortable to use We must understand them clearly and make a good distinction when choosing

There are two ways to connect the load-bearing wheel

Combination of forklift and unmanned warehousing With the advent of the information age, unmanned intelligent warehousing has gradually developed, and this technology will become the mainstream concept for the development of logistics equipment in the future

1M, etc

Operators of explosion-proof electric forklifts must be qualified to use the equipment, operate it in accordance with regulations, and avoid unnecessary dangers

Any breakthrough and application of new technologies should bring breakthroughs to the development of new energy forklifts

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info