91a在线视频,男人午夜视频,91嫩草香蕉

BYD four-point electric forklift lead-acid battery-

Changing lead-acid battery forklifts to lithium battery forklifts is not a simple battery conversion

The highest temperature of the surrounding gas is 40℃ and the lowest temperature is -25℃

We must understand them clearly and make a good distinction when choosing In November 2018, Hangcha Group released a new product, the XC series new energy electric forklift, developed in cooperation with Contemporary Amperex Technology Co In 2020, the sales volume of electric forklifts in China's forklift manufacturing industry reached 410,300 units, a year-on-year increase of 37

The operator must stay away from non-staff members in the counterbalanced forklift's working area and immediately issue a warning if there is any danger

Wide applicability: It can be used for various purposes such as logistics distribution centers, warehousing stackers, material transfer yards, etc

This machine has an ultra-thin body design, stepless speed change, a very small turning radius, a solid body, light and flexible movements, no noise, no pollution, a long working time on a single charge, and reliable performance

When the ambient temperature is 40℃, the relative humidity should not exceed 50%

When using electric forklifts in winter, the most important thing to pay attention to is battery maintenance

In addition to the above conditions, when choosing the battery for the electric transport truck, we must consider the price of the forklift and our own budget

However, the disadvantage of manual pallet trucks is that they are time-consuming and labor-intensive, and their work efficiency is lower than that of electric pallet trucks

Just remove two bolts and take off the rear cover, and the main key components can be immediately inspected and repaired

BYD four-point electric forklift lead-acid battery-

As an important part of cold chain logistics, forklifts are widely used in cold storage, and their market demand is also growing rapidly

Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

The first reason is the poor quality of the plate

If the welding current enters the battery, it will cause damage

At this time, the plate will appear rotten, and the active material will form blocks and accumulate between the two separators, resulting in a decrease in the capacity of the battery

The use of 5G networks provides strong technical support for the popularization and improvement of factory automation

However, electric pallet trucks are much more expensive than manual trucks, and they take time to charge It is recommended to use them outdoors

Lifting capacity test: Test different loads, the corresponding maximum pressure of the hydraulic system, the maximum lifting speed, the maximum lowering speed, the shortest time when lifting to the maximum stroke, and the shortest time when falling from the maximum stroke

During the unloading process, rapid descent and unloading are strictly prohibited; 12

If the welding current enters the battery, it will cause damage

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

BYD four-point electric forklift lead-acid battery-

Its function is to control the movement of the lifting or tilting hydraulic cylinder valve core through the operating handle according to the needs of the lifting and tilting of the fork, and input high-pressure oil into the lifting or tilting hydraulic cylinder

Have the corresponding safety technical knowledge and skills for special equipment operators with forklift certificates; 6

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle

However, the electric hydraulic transporter must use imported electronic control, handles and other circuit control components and hydraulic components, which are relatively expensive

The vehicle runs ahead and the speed is controlled by the rotation angle of the direction speed control button

Currently, most lithium-powered cars are used in commuter cars, electric maintenance vehicles, sanitation vehicles, and short-distance buses

If there is no abnormality during the retraction of the fork, after the fork returns to the middle position, in order to lower the center of gravity of the unmanned forklift, ensure the smooth and safe operation, and take into account the efficiency of cargo storage, the loading platform will fall back to 800mm above the ground

The vehicle body is easy to disassemble and assemble

From the current situation, the most popular new energy technology is still mainly based on electric forklift technology

Warehouse forklifts are also the main tool for loading and unloading goods

Large-tonnage electric pallet trucks have the advantages of energy saving, no exhaust emissions, and environmental protection

Disadvantages: Electric transport trucks must use imported electronic control, handles and other circuit control components and hydraulic components, which are relatively expensive

, jointly invested in the establishment of Hangzhou Pengcheng New Energy Technology Co The load should be in a low position when the electric forklift is moving, and the height of the fork from the ground should not exceed 300mm

There is a tortoise and rabbit regulator on the handle, and the tortoise speed and rabbit speed can be switched freely

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info