www·91·com,日韩城人网站,四虎永久精品在线

BYD lithium battery palletizing forklift failure and maintenance-

The third step is to adjust the height of the forks

If the operator mistakenly operates the direction backward and the body does not have time to avoid, the operating arm and the body will collide, the control switch will be closed, and the electric pallet truck will brake urgently

If the battery is not used for a long time, it should be recharged in time

When the electric forklift is moving, it is not allowed to turn the azimuth switch to change the driving direction to avoid burning electrical components and damaging the gears

What are the advantages of lithium battery forklifts? With the development of society and the advocacy of environmental protection in various places, there are more and more energy-saving products on the market

Don’t easily believe a salesperson’s opinion

Forklifts are generally equipped with pneumatic tires as standard, but they are prone to blowouts and are not wear-resistant, increasing maintenance costs

In addition, iron batteries can be fast charged in 1 hour and can be used at any time without affecting the battery cycle

The key parameters of unmanned forklifts involved in this article are shown in Table 1: Among them, in order to effectively reduce the width of the stacking channel, the minimum stacking channel width was reduced from the traditional 3 meters to 1

Energy saving and safety

The most prominent advantage of AC motors is that they do not have carbon brushes and are not subject to current restrictions like DC motors

Manual trucks use a manual hydraulic pump to lift and lower the equipment through manpower, while electric trucks use a power source battery, a drive motor, and a drive wheel to achieve lifting and lowering

If you want to buy a cost-effective electric transporter with low price, good quality and good service, you should first refer to the production strength of the manufacturer

The technical threshold is relatively low and the unit price is also relatively low

BYD lithium battery palletizing forklift failure and maintenance- Manual Pallet Truck The manual pallet trucks manufactured by electric forklift manufacturers need to rely on human power to walk and are operated by handles

For operator safety and comfort, the Hyster S27-3

Applicants for the forklift special equipment operator certificate examination must be over 18 years old; 2

Among them, Zhejiang Hangcha Intelligent Technology Co

It mainly includes inspection before use, inspection during work and maintenance after returning to the warehouse

Regardless of the brand of electric forklift, if it is a lithium battery, it is necessary to regularly check whether the electrical socket can be used normally and whether the battery casing is damaged There is no problem with the normal use of lithium batteries, but even if the technical level of lithium batteries is high, there is still a small safety risk

If it is reduced early, you can grab the market, but if it is reduced late, you can only passively follow

"No cobalt" and "lower lithium content" complete the battery's environmental compatibility and significantly reduce waste disposal costs Whether purchasing an electric transport truck, an electric stacker or a manual hydraulic forklift, in addition to considering its own site, environment and other conditions as well as requirements for battery life, product quality, etc The third reason is that the charging and discharging current is too large or long-term overcharging causes the electrolyte temperature to be too high The era of manual handling is gone forever, so the purchase of electric forklifts is an inevitable result

BYD lithium battery palletizing forklift failure and maintenance-

It can be seen that the application of 5G Internet of Things technology has realized the informatization, transparency and intelligence of the entire logistics

Safety of lithium battery forklifts 10

, Ltd

to maintain the stability of the forklift

This is an obstacle

The handle design conforms to the principles of ergonomics

The humidity of the buffer zone can be controlled with the help of a dehumidifier, or the temperature can be controlled by isolating the loading and unloading area to ensure a lower humidity

The oil pumps and valves of the hydraulic system are all packaged at low temperatures, and the hydraulic hoses are made of low-temperature resistant rubber materials to effectively prevent hose degradation and hydraulic function abnormalities caused by low temperatures; in addition, due to the change of the hydraulic working oil, the viscosity of the hydraulic working oil also changes at low temperatures, so the hydraulic oil pump used for lifting should also use an ultra-low temperature hydraulic oil pump

The future trend is clear The industry generally believes that with the country and society increasing environmental protection standards for corporate production and the change in economic development model, forklift electrification is a major trend in the future

Therefore, the "oil-filled" lifting cylinder is used to fill the inner cavity of the cylinder with hydraulic oil, which can effectively prevent the inner wall of the cylinder from rusting

2M, 1

Therefore, when purchasing an electric transport truck, it is not enough for companies to only compare the price of the forklifts 1

Now we all know that electric forklifts are common and can be found everywhere

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info