2018中文字幕在线,国产精品露脸自拍,日韩精品欧美

What does BYD's four-point electric forklift maintenance include?- This idea is too one-sided The fourth step is to drive the electric forklift slowly forward and allow the forks to fully insert under the cargo Let's take a look at the lifting situation first

Warehouse forklifts are mainly designed for handling goods in warehouses

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions 3

0 meters

The advantage of electric drive is that it saves a lot of labor and is more efficient than manual labor

What kind of faults usually occur when electric forklifts are in use? Electric forklifts, I believe everyone is familiar with them, right? Generally speaking, mechanical equipment will inevitably fail after long-term use, and electric forklifts are no exception

BYD's new energy forklifts have zero emissions, high efficiency, and low overall use costs

If the battery is not used for a long time, it should be recharged in time

Due to the size, the design of the entire car is less playable; 2 The company's V series, D series, S series AC electric electric control products and M0, M1 smart meters are suitable for electric counterbalanced forklifts, storage trucks, tractors, AGV and other electric industrial vehicles

, Ltd

What does BYD's four-point electric forklift maintenance include?-

After the forklift has been operating for a specified period of time, it should leave the cold storage and rest and replace the battery in the buffer zone

4 Stability is particularly important in this equipment The forklift can only be moved with the current generated by the battery, and never with rectified AC to avoid damaging electronic components If you really encounter a problem, be sure to cut off the power before checking or repairing

The second is three-dimensional warehousing based on shuttle vehicles, which is mainly used in scenarios with medium and low shelves and strong product homogeneity

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area

The forklift editor reminds everyone that operating a forklift requires professional theoretical and practical training

It is a professional warehousing equipment manufacturer integrating energy saving, environmental protection and quality2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable The rated center distance refers to the horizontal distance from the center of gravity to the vertical forearm of the fork when a standard weight of cargo is placed on the fork of the electric forklift

The battery is the power source of the vehicle and should be charged in time and maintained frequently

Nowadays, electric pallet trucks produced by electric transport truck manufacturers have become very common handling equipment in factories and warehouses

280g/cm3; adjust the engine oil in time, install insulation measures when the equipment is working on site, install oil preheating device when necessary, and start the engine regularly to preheat each part of the working system

What does BYD's four-point electric forklift maintenance include?-

In addition, the cause of forklift corrosion is not only related to the environment but also to its own structure

and Hangzhou Pengcheng New Energy Co

The engine problem of diesel forklifts, whether it is an imported engine or a domestic engine, is the core part of the forklift's performance, and there are many brands to choose from, which requires careful comparison and analysis; and diesel forklifts also need to consider whether the exhaust pipe blows to the ground or to the sky 2

When the electric forklift is operating in the warehouse, it should be avoided that the forklift is driving and lifting at the same time 9

When the thickness of the friction brake pad reaches the minimum thickness allowed, the friction brake disc must be replaced

Lifting capacity test: Test different loads, the corresponding maximum pressure of the hydraulic system, the maximum lifting speed, the maximum lowering speed, the shortest time when lifting to the maximum stroke, and the shortest time when falling from the maximum stroke

If the lifting height of the fork does not reach the required height, add hydraulic oil

At present, AGV products include stacking AGV, counterbalanced forklift AGV, pallet forklift AGV, reach forklift AGV, three-way stacking AGV, heavy-load traction AGV, outdoor unmanned traction AGV and customized non-standard conversion unmanned handling vehicles

In addition, there are also types such as hydraulic transporters and micro-diamond transporters

Improve operating efficiency fast charging mode, 1-3 hours fast charging mode is suitable for multi-shift operation

are all protected to reduce the occurrence of faults

Have a level of education that is appropriate for the type of special equipment operation for which the forklift license is applied; 4

It is a popular logistics storage truck at home and abroad

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info