日韩一区二区三区在线视频,国产精品美女免费视频,青青草国产一区二区三区

What motors do BYD pallet trucks generally use?-

Forklifts should be maintained daily and weekly on time

When replacing the hydraulic oil, make sure that the oil tank is clean, the oil is free of impurities, and the oil is sufficient

There is no need to replace easily damaged electronic parts, so electric forklifts are more economical After arriving at the destination, the chassis is lowered by hydraulics, and the goods fall to the ground with it, so the transport vehicle can be easily pulled out, eliminating the complicated process of manual handling

②The floating charging device effectively prevents overcharging

In the past few years, BYD Forklift has continued to make efforts and has been improving in parts selection, production process and key performance optimization, and manufacturing cost control The sprocket should rotate flexibly Although electric pallet trucks are very safe, there are still some precautions that drivers need to pay more attention to At present, most lithium battery forklifts are still using lead-acid battery bodies, which do not give full play to the small size and high specific energy characteristics of lithium batteries The semi-electric forklift factory said that it can be used in a wide range of operations and is suitable for loading and unloading, stacking and moving of finished goods in ports, stations and enterprises

Important reminder, new forklift safety standards are coming soon! Safety Technical Regulations for Special Motor Vehicles in the Factory (TSG 81—2022) The new regulations will officially come into effect on December 1, 2022! New regulation changes 1 The regular inspection cycle of forklifts has been adjusted from 1 year to 2 years

When walking in the warehouse, pay attention to the dangers of forklifts, specifically: (1) When passing through an intersection or crossing a forklift lane, point and confirm; (2) When walking in the warehouse, do not talk on the phone or do other things that affect your concentration; 3

2 2

In the past few years, BYD Forklift has continued to make efforts and has been improving in parts selection, production process and key performance optimization, and manufacturing cost control

What motors do BYD pallet trucks generally use?-

The shedding of active material on the positive plate is a common problem on all-electric truck batteries, which can cause a short circuit in severe cases

Electricity meter When the key switch is in the on state, the power meter displays the remaining battery power, with a total of ten grids

Before buying, you should consult the merchant about the service life

Before moving, the goods to be moved need to be stacked high, which can effectively save space and improve space utilization Instrumentation The power meter displays the power value when working normally, reflecting whether the battery power meets the requirements

So, how wide should the passage be reserved to make the best use of the factory? The electric forklift manufacturer will explain it in detail

The following is shared by BYD Forklift Editor: 1

It is not allowed to drive while raising or lowering the fork; 2

Precautions after using electric forklift in warehouse: 1

In 2019, China's industrial vehicle industry entered a period of adjustment, and the trend of forklift electrification became more prominent

The large-capacity battery and ultra-long battery life fully meet the needs of some companies for two-shift operations, and still maintain efficient handling during the peak period of logistics

Electric forklift manufacturers remind that there are many things that companies need to pay attention to when purchasing a 3-ton electric forklift (12) When a forklift is carrying cargo downhill, it should drive in reverse to prevent the cargo from falling off

What motors do BYD pallet trucks generally use?-

The above are some common terms on the parameter table of electric forklifts that are easy to confuse companies

"Cobalt-free" and "low lithium content" achieve the environmental compatibility of the battery and greatly reduce the cost of waste disposal The minimum turning radius of a forklift refers to the minimum distance from the outermost side of the forklift to the turning center when the steering wheel is fully turned when the electric forklift is unloaded, that is, the minimum outer turning radius, and the minimum distance from the innermost side of the forklift to the turning center, that is, the minimum inner turning radius (2) When the direction switch is turned to the reverse position during normal operation, the electric brake function can be executed

Terms such as rated load, maximum lifting height, channel width, etc

AC drive motor, without carbon brush, basically requires no maintenance, reducing maintenance costs

4 The operation is simple and flexible

Transmission system 1

Tilt the joystick to tilt the mast backward to prevent the cargo from falling while the electric forklift is driving

In short, the development history of forklifts reflects the economic development curve The cost of using explosion-proof electric transport vehicles is more than 20% less than that of pure manual transportation (2) High safety: Able to withstand the most severe conditions; it will not catch fire or explode after tests such as collision, extrusion, puncture, fire, high and low temperatures; and impact

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info