国产成人精品网址,在线视频91p,二区三区不卡不卡视频

BYD forklift stacker does not move - 3

To choose which type of tool, you still need to base it on the actual situation

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

Warm reminder: In addition to common models, non-standard customization can also be carried out according to the user's site, environment, cargo, and load to meet the needs of special environment Reversing 1

Parking (1) Release the direction select switch

Before moving, the goods to be moved need to be stacked high, which can effectively save space and improve space utilization

, Ltd

Since it involves indoor and outdoor operations, the two configuration ratios are considered

If an accident happens, the consequences will be disastrous

Without flexible lifting and handling tools, it is impossible to move goods by manpower alone

You should be careful before buying a forklift and do not trust the seller's words to avoid unnecessary trouble and loss

The lifting device also comes from the motor to drive the hydraulic pump station to push the hydraulic oil inside the hydraulic cylinder to achieve lifting, rising and falling

Regardless of the brand of electric forklift, if it is a lithium battery, it is necessary to regularly check whether the electrical socket can be used normally and whether the battery casing is damaged

BYD forklift stacker does not move - The hydraulic oil temperature is too high, resulting in a decrease in viscosity and deterioration, and it needs to be replaced in time This parameter is very important and is the key to determine the cutting method according to different cutting methods

The fork design combines European and American pallet standards

Electric pallet trucks have the advantages of energy saving, no exhaust emissions, and low noise

Later, my country's forklift manufacturer invented the Little King Kong through lightweight design, which rapidly reduced the cost of electric transport trucks

In general, electric pallet trucks are still worth buying, which can improve work efficiency and save costs

Slow driving function: put the handle in a nearly vertical state, and the driving speed will automatically decrease, making it easier to achieve accurate operation in narrow spaces

It has the functions of extending life and estimating remaining power consumption

Before using the explosion-proof electric forklift, it is necessary to conduct a safety inspection on the explosion-proof electric forklift to ensure that the equipment is in good condition and the operation is safe and reliable

If an enterprise wants to choose the most cost-effective electric warehouse forklift, it must first see how much load it needs, and then choose which type of forklift to use

When in use, a buffer zone should be built between the cold storage and the charging and loading and unloading areas

Compared with traditional lead-acid batteries, lithium batteries have incomparable advantages4%

Clean the gear box and change the gear oil

6 meters through structural design, which greatly improved the storage capacity rate of terminal warehousing

BYD forklift stacker does not move -

Using batteries as the power device, it is green and environmentally friendly and has been widely used in all aspects of warehousing, logistics and transportation

Before entering the cold storage, please operate the hydraulic and travel movements until the temperature of each component rises before entering the cold storage

The routes can be set in advance, and the unmanned forklift will work according to the set routes

To be on the safe side, the driver is advised to check whether the braking system of the electric pallet truck is normal, whether the emergency power-off button is normal, whether the battery is sufficiently charged, whether there is any damage, etc

(2) Check the entire vehicle for oil and water leakage (3) Check the working conditions of various instruments, signals, lighting, switches, buttons and other auxiliary equipment (4) Check whether the engine is abnormal and whether it is working normally (5) Check the technical condition and tightness of steering, brakes, tires and traction devices (6) Check the technical condition and fastening condition of the lifting mechanism, tilting mechanism, fork frame and hydraulic transmission system

After no abnormality is found, the fork is extended to pick up the goods

For the forklift market, electric forklifts are becoming more and more widely covered After charging is completed, reset the power socket

Although the diesel engine of an internal combustion forklift is more reliable and powerful, the cost of diesel is high, and the exhaust emissions can easily pollute the environment; the cost of electric forklifts is much lower than that of other fuels, and there is no exhaust and low noise, which meets the environmental protection requirements advocated by the country

The minimum mast tilt should be used to stabilize the load to prevent the load from sliding backwards 1 Manual trucks use a manual hydraulic pump to lift and lower the equipment through manpower, while electric trucks use a power source battery, a drive motor, and a drive wheel to achieve lifting and lowering

The use of electric pallet forklift is not difficult, it is nothing more than practice makes perfect

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info