国产精品一区二区无线 ,欧美人与动性xxxxx杂性,韩国av一区二区三区四区

BYD Forklift Electric Stacker Supplier-

Electric forklifts have a longer service life

The air gap can be adjusted multiple times

The test requirements are as follows: Basic performance tests: automatic operation, repeated positioning accuracy, in-situ reversing, in-situ rotation, lateral movement, fork lifting, fork extension, safety detection, etc

Mastering these methods during daily use can shorten the time for equipment failure repair and reduce maintenance costs

Electric transport truck: 1

It is very necessary to add a camera behind the forklift to give the driver an eye, which greatly helps the driver to avoid collision when reversing

75 times, the motor can work normally

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

The following BYD forklift editor will share with you the precautions for using a forklift: 1

After forking the goods, it is lifted a short distance and then the mast returns to its original position along the track inside the leg

Electric Pallet Trucks Drive and Operation start 1

The noise value of the brake is related to the size

BYD Forklift Electric Stacker Supplier-

Check whether the phase change room is clean

Forklift operator certificate: Article 38 of the Regulations on Safety Supervision of Special Equipment states: "Operators and relevant management personnel of boilers, pressure vessels, elevators, lifting machinery, passenger ropeways, large amusement facilities, and special motor vehicles within the site (factory) shall be qualified by the special equipment safety supervision and management department in accordance with relevant national regulations and obtain a special operation personnel certificate in a unified national format before they can engage in corresponding operations or management work When the solenoid, manual reversing valve, or one-way valve is blocked by waste or the sealing ring is worn, causing internal leakage in the equipment, the valve components must be cleaned and the worn seals replaced in time during daily use The neutralization position of the carbon brush has been adjusted on the test bench of the factory, and customers are not allowed to disassemble and adjust it at will

Check the sensitivity of each control system

As a short-distance cargo transportation vehicle, they often carry heavy cargo

The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134

How to choose a second-hand forklift 1

Fault 4: Unable to move forward or backward normally Check whether the battery has sufficient power

The worker's improper driving caused the vehicle to lose control and collided with Xu, resulting in Xu's death! Hidden dangers are everywhere, so keep safety in mind

Simple classification: Electric transport trucks are powered by electric lifting and electric movement; manual transport trucks are powered by manual hydraulic lifting and human pulling

The battery is the power source of the vehicle and should be charged in time and maintained frequently

③ Check the wear of the brushes in the hydraulic pump motor and replace any brushes that may not meet the requirements to maintain good contact

However, this data generally has a deviation of 100mm, so it is recommended that companies add 100mm when calculating

BYD Forklift Electric Stacker Supplier-

(20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system

Driving operation: 1 The S2 BYD forklifts are equipped with lithium iron phosphate batteries independently developed by the company, which has set off a green energy storm in the industry and become a representative company of new energy powered forklifts in the industry

Generally, it is one year or 1,000 hours (whichever comes first)

Today, the market is becoming more and more mature, and manual pallet trucks are comfortable, labor-saving and money-saving, and can be called economical and easy-to-use handling tools

They are suitable for use in warehouses, supermarkets, cold chains, logistics, docks and other places

Check whether the connection of the motor unit outlet (or terminal) is correct and reliable

Relevant data show that after years of technological accumulation and continuous R&D investment, domestic brands have gradually aligned their product line integrity and technical quality management with international industry standards, and are cost-effective

Power socket assembly When charging the battery, unplug the socket with the handle and plug it into the plug on the charger

Terms such as rated load, maximum lifting height, channel width, etc

Excellent electronic control system: Equipped with the industry's excellent intelligent electronic control system, the forklift is easy and efficient to operate

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info