国产精品成久久久久三级,第一站视频久草网,男女啪啪网站

BYD China Electric Forklift Operation Tutorial- 2 Clean the rotating bearings and add lubricating oil 3

If other personnel at the work site do not keep a safe distance from the forklift, they must stop working immediately; 2

The operation is simple, safe and reliable

The lifting device also comes from the motor to drive the hydraulic pump station to push the hydraulic oil inside the hydraulic cylinder to achieve lifting, rising and falling

The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134

(2) Check the entire vehicle for oil and water leakage (3) Check the working conditions of various instruments, signals, lighting, switches, buttons and other auxiliary equipment (4) Check whether the engine is abnormal and whether it is working normally (5) Check the technical condition and tightness of steering, brakes, tires and traction devices (6) Check the technical condition and fastening condition of the lifting mechanism, tilting mechanism, fork frame and hydraulic transmission system

Direct handling costs can be reduced by more than 25% compared to manual handling

Check the hydraulic pump, oil pipe, joints and oil seals to see if there is any oil leakage

In order to make the electric transport truck run smoothly during use and the fork lift smoothly, we should add lubricating oil to the transport truck, which can reduce the friction of various components and prevent damage to the parts caused by excessive wear

Check before use: (1) Check whether the fuel, lubricating oil, hydraulic oil and coolant are sufficient

Impact of low temperature environment on hydraulic system Hydraulic oil used at room temperature is prone to freezing in low-temperature environments, requiring the viscosity of the hydraulic oil to be higher than that of ordinary hydraulic oil; in addition, hydraulic high-pressure hoses are also prone to fatigue, brittleness and hardening at low temperatures

Although the price is higher than that of internal combustion forklifts, its operating cost is lower than that of internal combustion forklifts

BYD China Electric Forklift Operation Tutorial- 3

2-week inspection Forklift users should spend a few minutes each week cleaning the machine, paying special attention to removing any entanglements such as silk, linen, and rags around the wheels and axles

2*1 The special low-temperature working environment of the cold storage will have many impacts on the normal operation of the forklift 3 The oil leaking from the crankshaft rear oil seal will enter the clutch, which will cause the clutch plate to slip or even burn

Instead, it can turn the operating arm to move forward or backward to bypass the obstacle

Operators of explosion-proof electric forklifts must be qualified to use the equipment, operate it in accordance with regulations, and avoid unnecessary dangers

Do you think this kind of micro-innovation is difficult? And it must be developed when there is market demand

This is especially true on a slope, otherwise there is a risk of rollover

The body design of the electric transport truck is suitable for the workplace and has a good service life Paper tube pallet truck is used for transporting warp beams of water jet looms, and can also be used for transporting paper tubes and paper rolls

The electric transport truck manufacturer will tell us its use and function

The maximum weight of goods that the automatic guided vehicle can bear: the load capacity range of AGV is 5T-1300T

BYD China Electric Forklift Operation Tutorial- Dust removal of the entire circuit Considering the accuracy and flexibility of forklift operation, a side shifter is required

In addition, the width of the right-angle stacking channel should also be considered, which means that the electric forklift can safely pass through when turning 90 degrees in the corridor

Mechanism and principle: 1

(1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward

When in use, a buffer zone should be built between the cold storage and the charging and loading and unloading areas

FJ AC electric control of Fanji Technology is the only mature national brand that has been used in batches in the market for more than 4 years

There are many specifications with and without pedals

1*1

A heater should be installed in the cab Their performance and reliability need to match the freezing and refrigeration technology 3 They fully consider the safety and comfort of the driver and combine many ergonomic designs to make it easier for the driver to get through the running-in period

It is quick and easy to use and does not require any skills, making it very easy to use

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info