欧美一区二区三区久久综合,亚洲精品国产精品国自产,精品国产综合区久久久久久

Is BYD's stand-up electric forklift a special equipment?-

The forklift adopts an all-steel structure as a whole, and the surface is coated with anti-corrosion paint

(3) High and low temperature performance: It can be used normally at 60℃, without the need for additional air conditioning equipment or charging temperature compensation Before lifting the forklift, make sure the forklift is fully inserted into the bottom of the pallet

For example, for instruments with electric heating, waterproof connectors and electrical connector terminals are matched with rubber covers, and professional circuit routing is used to prevent water accumulation, so as to effectively deal with electrical faults caused by freezing and condensation

Various parts on the vehicle can be replaced in a very short time

4% The installation sequence is the opposite of the disassembly sequence Any breakthrough and application of new technologies should bring breakthroughs to the development of new energy forklifts Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model If it is lower than the limited working voltage, the forklift should stop running immediately Transportation and storage This all-electric stacker must be placed in a horizontal position during transportation and storage to prevent oil spillage At present, most lithium battery forklifts are still using lead-acid battery bodies, which do not give full play to the small size and high specific energy characteristics of lithium batteries Improve operating efficiency fast charging mode, 1-3 hours fast charging mode is suitable for multi-shift operation Electric pallet trucks are powered by electricity, which saves manpower, is more efficient, is not difficult to operate, and is pollution-free, low-noise, and very safe to use

The double-drive axle makes maintenance easier to operate and more convenient

Is BYD's stand-up electric forklift a special equipment?-

Mastering these methods during daily use can shorten the time for equipment failure repair and reduce maintenance costs

What are they? The following is a brief sharing by BYD lithium battery forklift: It needs to be emphasized that the difference between lithium-ion forklifts and traditional electric forklifts is not as simple as replacing batteries

Use a grinding wheel to grind out the weld bevel at the crack

The main feature is that in order to overcome the overturning moment generated by the goods, a counterweight is installed at the tail of the forklift

When the bending and twisting deformation of the electric forklift mast is too large and it is difficult to correct it by cold pressing, it can be corrected by heating

Electricity meter When the key switch is in the on state, the power meter displays the remaining battery power, with a total of ten grids

In applications that require very low noise, it is recommended to readjust the air gap within the maximum air gap range

③ Check the wear of the brushes in the hydraulic pump motor and replace any brushes that may not meet the requirements to maintain good contact

Now we all know that electric forklifts are common and can be found everywhere

Forklift drivers, please note: (1) Before moving the vehicle, make sure there are no people in front, behind, or around the vehicle, especially if there are obstacles around; (2) When driving, do not exceed the speed limit, slow down when turning, and point to confirm; (3) It is strictly prohibited to use shelves, material frames, etc

Internal combustion forklift Internal combustion forklifts are generally driven by fuel engines, using fuels such as diesel, gasoline, liquefied petroleum gas or natural gas

Electric transport forklift manufacturers emphasize that the maintenance cost of electric forklifts is very important for the normal life cycle, otherwise the battery is not powerful and the progress of the work is affected Warehousing: Warehousing forklifts are mainly designed for handling goods in warehouses

Is BYD's stand-up electric forklift a special equipment?- 8 Seeing this, I thought of the case of Xiaomi mobile phone, which directly reduced the price of smart phones to less than 1,000 yuan In addition, the electric forklift manufacturer tells you that it uses an integrated hydraulic pump station, which makes cargo lifting safer and more labor-saving

(4) The control arm moves downward from the uppermost position and should be between the uppermost and lowermost positions

Electric pallet trucks are the main handling tools in warehousing and logistics

Today, the electric transport truck manufacturer will tell you how to prevent electric pallet truck malfunctions Explosion-proof grade: Ex IIB T4 Gb 6 Use the DC voltage range of the multimeter to measure the voltage across the battery

However, although the electric lifting equipment produced by foreign manufacturers in the past was of good quality, it was too expensive to be popularized

Box cover Removable for good visibility when in use

When moving, the fork frame drives the fork back into the support plane

The application scenario guarantees the confidence of the product

When approaching the goods, it should stop first, wait until the position is clear, and slowly align the double forks with the goods 3

Electric truck manufacturers recommend that we have many specifications of electric pallet trucks, each with its own characteristics, and choose carefully

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info