欧美专区日韩,九色国产蝌蚪视频,最好2018中文免费视频

BYD three-point electric forklift office- The mast of the electric forklift manufacturer has a forward inclination angle of 3°-6° and a backward inclination angle of 10°-12°

Unmanned forklifts are more efficient, more stable, more accurate and safer than forklifts

Driven by environmental protection policies and technologies, the proportion of electric forklifts in my country will further increase in the future

There is a tortoise and rabbit regulator on the handle, and the tortoise speed and rabbit speed can be switched freely

Hydraulic device The pump is installed in an oil tank, and a pump motor, a pump and an oil tank body are compactly installed

The hydraulic oil temperature is too high, resulting in a decrease in viscosity and deterioration, and it needs to be replaced in time

The system has different driving force modes, which allows the vehicle to flexibly give full play to its characteristics under various loads, improve energy utilization efficiency, and be more environmentally friendly and energy-saving

The worker's improper driving caused the vehicle to lose control and collided with Xu, resulting in Xu's death! Hidden dangers are everywhere, so keep safety in mind

In recent years, with the country's emphasis on environmental protection and the development of green warehousing and distribution, the development and research of electric forklifts and environmentally friendly forklifts has become a clear trend in the development of China's forklift industry

Electric transport trucks are no exception

It is widely used in petroleum, chemical, coal, metallurgy, transportation, shipbuilding and other industries

Forklift bearing broken The forklift bearing is a very important hardware component on the forklift

In order to further increase the company's electric industrial vehicle production capacity, Anhui Heli Co

BYD three-point electric forklift office-

At work, we must strictly abide by the regulations put forward by the transporter manufacturer and operate the all-electric transporter in a standardized manner, so as to extend its service life and reduce safety hazards

“It features heavy-duty components, a rugged design, a reliable electrical system and easy serviceability, and can be combined with other options to further match the truck to the specific application

Lifting structure The lifting structure is mainly composed of a gantry and a fork

When using an electric pallet truck, you should first know the functions of its buttons

Before charging, the electric forklift should be stored in a warm environment for a period of time so that the electrolyte can be thawed quickly before recharging Therefore, it is easy to make mistakes when you have to twist your neck to check the reversing road conditions 2 3 In 2021, China's forklift sales reached 1 If someone ignores the warning, the operator must stop the counterbalanced electric forklift operation The steering operation is the same as the way we drive a car, and the forklift bearing and forklift fork can be controlled by the joystick The battery is also very important for the electric transport truck

When entering and leaving factories, workshops, and warehouses, the speed should not exceed 5km/h

In order to further increase the company's electric industrial vehicle production capacity, Anhui Heli Co

BYD three-point electric forklift office-

There are many ways to classify forklifts: according to the structural type and characteristics of the forklift, the mass that the forklift can lift, the movement mode of the forklift, etc

Both walking and lifting are achieved by manpower

Therefore, AC motors require fewer components than DC motors, have no wearing parts that need to be replaced regularly, require almost no maintenance, are more efficient, and are more durable

The combined effects of subtropical, humid tropical, marine climate environment and industrial waste gas and dust cause corrosion and damage to the parts of internal combustion forklifts

Based on years of professional experience, we proposed an innovative solution: using two electric motors and corresponding gearboxes

Electric forklifts are also good in terms of driving convenience, but attention should also be paid to maintenance after long-term use

How to improve the working efficiency of forklifts, reduce customer maintenance costs and improve safety performance has been a hot topic for forklift manufacturers in recent years

Lifting capacity test: Test different loads, the corresponding maximum pressure of the hydraulic system, the maximum lifting speed, the maximum lowering speed, the shortest time when lifting to the maximum stroke, and the shortest time when falling from the maximum stroke

Excellent hydraulic station, low noise, small vibration, good sealing performance, automatic adjustment of no-load and full-load lowering speed to ensure smooth lifting and lowering

Make sure to check your surroundings and drive slowly when turning; 2

Therefore, correct maintenance has become more important, and companies and drivers need to pay more attention The structure of electric forklifts: The body is the main structure of the forklift, which is generally made of steel plates of more than 5mm

Drive system: The drive system is one of the important components of the electric forklift

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info