国产在线精品一区二区不卡 ,中国成人亚色综合网站,欧洲精品乱码久久久久蜜桃

BYD imported battery forklift maintenance standards-

Forklifts are special equipment used in industrial and logistics warehouses

280g/cm3; adjust the engine oil in time, install insulation measures when the equipment is working on site, install oil preheating device when necessary, and start the engine regularly to preheat each part of the working system

Manual forklift

If there is no damage, but it just needs maintenance, we can do it ourselves

The raised part will hit the timing gear on the camshaft, causing abnormal engine noise

(4) Turn the key switch to the off position

Prototype Testing First, the test plan of the prototype is formulated in detail according to the relevant parameter indicators, and then the indicators are tested in the actual application environment to see whether they meet the standards At lower temperatures, higher relative humidity is allowed

Notice! Operating the stacking forklift at low voltage for a long time will damage the battery life

In fact, most of the reasons here are man-made

Charge the battery in time

The power manager can regularly monitor the battery status

The forks of a battery truck are usually raised to a height of 200 MM, which is just enough to lift the pallet off the ground and keep a distance from the ground, allowing for free movement

BYD imported battery forklift maintenance standards-

Consideration of the company's own costs

The difference between unmanned forklift and traditional forklift The biggest difference between unmanned forklifts and traditional forklifts is that they do not require artificial intelligence driving, but use different navigation information technology to achieve 24-hour automatic control to complete various handling and transportation tasks

The function of the safety valve is to allow the oil to flow back to the oil tank from the return pipe when the oil pressure in the system exceeds a certain value

Forklift operating procedures The details of the forklift safety management system of different companies are different, but they all include driver job responsibilities, safety technical operating procedures, equipment management system, daily inspection management system, maintenance management system, accident reporting and emergency rescue management system, etc

The following is shared by the new energy forklift editor: What kind of faults usually occur when electric forklifts are in use? 1

1-day inspection ① Check whether the battery is fully charged (you can also check the side surface of the battery)

What are they? The following is shared by the editor of BYD Forklift: It should be noted that the difference between lithium battery forklifts and traditional electric forklifts is not as simple as replacing batteries

If there is condensed water on the surface of the vehicle, drying measures must be taken or the condensed water must be dried before entering the cold storage

They are suitable for heavy load and long-term cargo transfer conditions, which can greatly improve cargo handling efficiency and reduce labor intensity

(9) It is prohibited to use a forklift to lift people to perform work at heights to avoid accidents of falling from heights

In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo

Check the turn signal; 5

■ Easier to operate Equipped with multi-disc parking and service brakes, the machine has better maneuverability

Its unit is millimeters

BYD imported battery forklift maintenance standards- Each electric pallet truck has a parts service life statistics table, which specifically records the start of use time and running time (in hours) of each wearing part We can recall that when the carburetor was not carefully maintained, was there a situation where the tension spring gasket fell into the intake pipe? This will cause the piston to be scrapped

When working in multiple shifts, electric motor-driven warehouse forklifts need to have backup batteries

As the name suggests, an electric pallet truck is a type of truck that uses a battery as its power source and an electric motor as its motive force, while a manual pallet truck mainly relies on manpower to operate The emergence of forklifts is a sign of maturity in the industrial field, breaking away from the shackles of traditional manpower supremacy When heating, the heating area should be minimized, the heating temperature should be lower than 700℃, and it should be cooled slowly to avoid increasing brittleness

When approaching the goods, it should stop first, wait until the position is clear, and slowly align the double forks with the goods

After installation, check whether the screws and elastic pins are installed in place and whether the wheel installation position is correct and not loose 3 Features: 1

Driving and driving are not suitable for simultaneous development

(8) When operating, forklifts must comply with factory traffic regulations and maintain a certain safe distance from the vehicle in front Different types have different prices Therefore, it requires the joint attention of the entire forklift manufacturing companies, sales companies, leasing companies, maintenance companies, and spare parts facilities companies

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info