国产精品入口麻豆免费看,欧美性猛交xxxx免费看手交,亚洲成人在线网

BYD ECB16S Lithium battery forklifts Price It is often used for stacking and loading and unloading of goods in warehouses Unlike internal combustion forklifts, electric forklifts are mainly powered by electricity (powered by forklift batteries), and the processing accuracy and automation are significantly improved, which greatly reduces the labor intensity of operators

The specifications of the forks are designed according to the maximum load of the forklift In order to prevent the glass from fogging, the cab glass should use electrically heated glass, or install wipers, hair dryers and other defrosting equipment to ensure the operator's vision After-sales service is the key, and you must choose a brand with good after-sales service

Clean the mud and other attachments on the outer shell regularly to avoid interfering with heat dissipation

Slowly release your thumb, the direction and speed control buttons will automatically return to their original positions and the vehicle speed will decrease The operator must be familiar with the condition of the vehicle before use, and must not allow unsupervised personnel to operate it at will; 3 3 When heating, the heating area should be minimized, the heating temperature should be lower than 700℃, and it should be cooled slowly to avoid increasing brittleness

Strictly follow the following rules: The following is shared by BYD Forklift Editor: 1

BYD ECB16S Lithium battery forklifts Price

Due to its zero pollution and low noise, it is widely used in indoor operations and other industries with high environmental requirements

During normal use, pay attention to the insulation of the battery

At the same time, Gongyan Industry Research Institute also provides industry data, industry research, policy research, industry chain consulting, industry maps, industry planning, feasibility analysis, business plans, IPO consulting and other products and solutions

3%; among them, domestic sales volume was 151,000 units, a year-on-year increase of 58

The driver must study it carefully

Just remove two bolts and take off the rear cover, and the main key components can be immediately inspected and repaired

Once the battery has problems, the all-electric transporter will not work properly

It has low electrostatic induction power, strong anti-interference ability, and stable and reliable operation I have seen no less than 50 configurations The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and improves the flexibility of operation Improper installation of the seal ring on the exhaust valve guide of the electric pallet truck will cause the exhaust pipe to drip oil and make some noise

When driving on a larger slope allowed, the operator must keep the cargo on the counterbalanced electric forklift and slow down at the same time, and never accelerate

So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

BYD ECB16S Lithium battery forklifts Price

Heavy duty design, compact structure, suitable for small space

It can be divided into electric pallet trucks, semi-electric pallet trucks and manual pallet trucks

Tilt the joystick to tilt the mast so that it is in a vertical position

Forklift drivers, please note: (1) Before moving the vehicle, make sure there are no people in front, behind, or around the vehicle, especially if there are obstacles around; (2) When driving, do not exceed the speed limit, slow down when turning, and point to confirm; (3) It is strictly prohibited to use shelves, material frames, etc

The new version of the regulations requires the installation of safety monitoring devices

The operation is simple, safe and reliable Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

If there is no damage, but it just needs maintenance, we can do it ourselves

(7) Check whether the tools and accessories on board are safe Inspection items during work: usually within 2 hours of work (1) Check the working condition of the engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperatures of the wheel axle, brake drum, transmission, torque converter, gear pump and drive axle are normal

Therefore, it requires the joint attention of the entire forklift manufacturing companies, sales companies, leasing companies, maintenance companies, and spare parts facilities companies

Excellent hydraulic station, low noise, small vibration, good sealing performance, automatic adjustment of no-load and full-load lowering speed to ensure smooth lifting and lowering

Before starting an electric forklift, you must check whether all parts are in good condition, and check the performance of all operating components and safety devices

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info