性18欧美另类,国产美女做爰免费视频软件,久久成人综合视频

BYD battery explosion-proof forklift forklift operation precautions-

(2) When an electric pallet truck encounters an obstacle, it should not force its way through

(2) Heavy-duty forklift: It uses a diesel engine as its power source, has a load-bearing capacity of 10

(4) Air gap adjustment: When the brake is powered off, adjust the air gap between the stator and the armature to the rated value "Z" by adjusting the three hollow screws and the brake mounting screws, using the plug, and make sure that the air gap in each direction is the same It has high storage efficiency and strong scenario applicability, but the cost is relatively high Electric pallet trucks use electric hydraulic pumps for lifting and lowering, and use electronic control (chopper) or domestic resistance electronic control to adjust the travel speed

Before starting work each day, a careful inspection must be carried out according to the inspection contents before work can begin; 5

warn! Do not operate an electric pallet truck with serious functional defects that endanger safety

If it is lower than the standard value, it indicates that the charging voltage is too low

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

Development Status Forklifts are an important branch of construction machinery and one of the important equipment in the logistics industry

This machine has an ultra-thin body design, stepless speed change, a very small turning radius, a solid body, light and flexible movements, no noise, no pollution, a long working time on a single charge, and reliable performance

3 Pay attention to the working voltage of the ammeter

Power battery products need to be safe, have high energy density and good high and low temperature performance, and they need to have high consistency

BYD battery explosion-proof forklift forklift operation precautions-

Stay away from forklift operation areas (including the rack centralized placement area), specifically: (1) Do not take shortcuts and go directly through the forklift operation area; (2) Do not take a rest in the gap between the racks because you are tired; (3) When working with suppliers to confirm and inspect parts, do not use the forklift operation area for convenience

Hangcha Group, together with Contemporary Amperex Technology Co Next, let's take a look at the special requirements for using electric forklifts in winter

It has low cost, but low storage efficiency and poor scenario applicability

Electric pallet trucks can be divided into two categories: semi-electric transport trucks and full-electric transport trucks

The forks can be tilted forward and backward following the hydraulic cylinder

(5) It is strictly forbidden to shut down the engine and coast downhill with an internal combustion forklift

The DC motor and hydraulic motor drive the lifting of the fork, pushing the cylinder up and down to lift the fork and goods

While pressing the handle, use your thumbs to rotate the travel button forward to move the electric pallet truck forward

5-5 tons, including counterbalance and three-point

This situation seems to be very good, but it actually reflects a big problem

What are they? The following is shared by the editor of BYD Forklift: It should be noted that the difference between lithium battery forklifts and traditional electric forklifts is not as simple as replacing batteries

BYD battery explosion-proof forklift forklift operation precautions- What advantages do lithium batteries have over storage batteries in electric forklifts? The use of lithium batteries in electric cars is affected by factors such as the popularity of charging equipment, the limited range of driving, and the wide and uncontrollable travel area

However, the biggest differences between forklift motor drive systems are as follows: 1

The installed warning lights and voice reminders and other functions keep safety around

In logistics, warehouses, factories and other places, transport trucks are needed to transport goods

It can be seen that the application of 5G Internet of Things technology has realized the informatization, transparency and intelligence of the entire logistics

The AC drive system makes the electric transporter more responsive, more accurate in control and more stable in operation When using a reach truck, special attention should be paid to timely charging and proper maintenance of the battery Forklifts are widely used in warehouses, factories, ports, airports and other scenes

Humanized handle design: Focusing on the user's height, body shape and hand shape, the handle design is also designed to maintain human health and high-frequency work efficiency, greatly improving the user experience High-performance wear-resistant silent wheels: Advanced technology wheels, with humanized operating experience, and silent performance allows space users to rest assured without being disturbed

The load should be in a low position when the electric forklift is moving, and the height of the fork from the ground should not exceed 300mm The third reason is that the charging and discharging current is too large or long-term overcharging causes the electrolyte temperature to be too high

Manual transport trucks mainly rely on manpower to push and pull goods, with a low degree of automation

So, what are the features that can attract the public's attention? The editor will give you the answer

Electric transport forklift manufacturers remind that when working in multiple shifts, motor-driven warehouse forklifts need to have backup batteries

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info