国产永久免费观看,欧美jizzhd精品欧美满,久久精品国产亚洲7777

BYD Lithium Battery Reach Forklift Rental Company-

If the lifting height of the fork does not reach the required height, add hydraulic oil

Warehouse forklift Warehouse forklifts are mainly designed for handling goods in warehouses At the same time, the product replacement cycle has been significantly shortened

Secondly, when picking up goods, the fork must be in place, one side of the goods must be attached to the fork, and the direction must be straight and not tilted

At lower temperatures, higher relative humidity is allowed After the forklift has been operating for a specified period of time, it should leave the cold storage and rest and replace the battery in the buffer zone Comparing the work efficiency between the two, the electric transport truck relies on the power system to easily lift and complete the loading, unloading and carrying tasks, and the electric transport truck only needs manual control of the handle to complete the work, and the continuous working time is longer than that relying on manpower

(7) Check whether the tools and accessories on board are safe Inspection items during work: usually within 2 hours of work (1) Check the working condition of the engine, chassis, working device, hydraulic system, instruments and signal devices (2) Check whether the temperatures of the wheel axle, brake drum, transmission, torque converter, gear pump and drive axle are normal

When using a reach truck, special attention should be paid to timely charging and proper maintenance of the battery

Use the DC voltage range of the multimeter to measure the voltage across the battery

The longer joystick greatly reduces the steering force and makes the operation easier

There is an emergency power-off button on the truck body, also called an emergency stop button, and on the handle are the fork lift button and the forward and backward knob

Among them, Zhejiang Hangcha Intelligent Technology Co

(3) After unloading, the forks should be lowered to the normal driving position before driving

BYD Lithium Battery Reach Forklift Rental Company- Some OEMs and supporting parts companies that made early arrangements achieved sustained development0 to 52

Reversing 1

With the continuous development, promotion and application of logistics technology, and the continuous improvement of the country's industrialization level, the scope of use of forklift products will be increasingly expanded, becoming a loading and unloading, warehousing and handling machinery with the largest output and specifications The weld height should not exceed 1-2mm above the substrate plane

It has high storage efficiency and strong scenario applicability, but the cost is relatively high

Trucks are used to control the driving speed and maintain the distance between vehicles to avoid extending the emergency braking interval longer than normal, about twice as long as in cold seasons The price of an internal combustion forklift is much more expensive than that of an electric or manual forklift

(9) It is prohibited to use a forklift to lift people to perform work at heights to avoid accidents of falling from heights

The seals can be replaced

When approaching the goods, it should stop first, wait until the position is clear, and slowly align the double forks with the goods

The reach truck has a small lifting capacity and is driven by an electric motor

So, what should you pay attention to when using an electric forklift to pick up goods? First of all, when moving the operating lever to adjust the mast tilt angle or fork height, the action must be continuous, and do not adjust repeatedly to avoid affecting work efficiency

, Ltd

BYD Lithium Battery Reach Forklift Rental Company-

In this case, we must pay attention to the battery temperature not being too low when charging the electric forklift in a low temperature area

Some OEMs and supporting parts companies that made early arrangements achieved sustained development

When building a factory or placing new shelves, be sure to reserve a channel of appropriate width to prevent the electric forklift from being unable to turn, stack goods, or pick up and place goods, which affects work efficiency and is time-consuming and laborious to adjust

Warehouse forklifts are also the main tool for loading and unloading goods

Judging from the current situation, the most popular new energy development technology is mainly based on electric forklift technology

Then there is the size of the battery box, large and small batteries

The high-quality electronic control system is easy to use and can be controlled easily

Secondly, when picking up goods, the fork must be in place, one side of the goods must be attached to the fork, and the direction must be straight and not tilted

Notice! Operating the stacking forklift at low voltage for a long time will damage the battery life

When picking up materials from the loading area, the action flow is shown in Figure 1-(a)

2 It is also necessary to practice more in daily work and accumulate experience First check the fasteners of the electric pallet truck to see if the nuts are loose and whether the gaps between the parts are too large

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info