男人天堂va,国产亚洲精品久久久网站好莱,亚洲欧美自拍偷拍色图

BYD Ride-On Forklift Contact Information-

If the welding current enters the battery, it will cause damage

Its principle is to transmit three-phase AC power to the fixed stator winding, generate a rotating magnetic field to induce the closed rotor winding to generate current, and the rotor rotates along the direction of rotation of the rotating magnetic field under the action of electromagnetic force

These data fully demonstrate that lithium-ion battery forklifts have been widely recognized by the market, and the electrification, new energy, and intelligence of forklifts are becoming new highlights

(5) When using a fork to pick up goods, the fork should be inserted as deep as possible under the load, and care should be taken that the fork tip does not touch other goods or objects

5 The rapid development of the logistics industry requires forklifts with short charging time, long service time, stable performance, high-intensity operation, and high degree of automation and intelligence ?The damping shock-absorbing spring does not need to be adjusted frequently, and can actively adjust the vertical drive unit according to the road conditions, reduce the impact of the ground on the drive unit, balance the force on the driving balance wheel, and improve the smooth operation efficiency What should you pay attention to when buying a forklift? There is no industry standard in our forklift market yet

The oil pump is excessively worn, causing internal leakage of the equipment, and needs to be replaced

What should we do if the electric pallet truck makes an unusual noise? The truck manufacturer will tell you about it

If the welding current enters the battery, it will cause damage

(5) Throttle valve, installed in the pipeline of the lifting hydraulic cylinder, its function is to increase the flow resistance of the oil, and ensure that the fork descends slowly when the lifting hydraulic cylinder releases pressure

It is widely used in ports, stations, airports, freight yards, factory workshops, warehouses, circulation centers and distribution centers, etc

The operation and control of electric forklifts are simpler and more flexible

BYD Ride-On Forklift Contact Information- Its maintenance should depend on what type of battery the electric transport truck uses However, the development of lithium batteries still has many technical shortcomings

When the counterbalanced electric forklift is on a curved road or narrow aisle, or when passing through a door or an irregular road surface, the operator must slow down

The AC drive system makes the electric transporter more responsive, more accurate in control and more stable in operation

If the abnormal noise is caused by damaged parts, we can consult the truck manufacturer for repair or replacement

The new generation of electric forklifts will have better maintainability and operability, and the display and fault diagnosis systems will be more complete

When the electric pallet truck approaches the fixed place where the goods are placed, slowly lower the forks to ensure the stability of the goods

You should be careful before buying a forklift and do not trust the seller's words to avoid unnecessary trouble and loss

For example, for instruments with electric heating, waterproof connectors and electrical connector terminals are matched with rubber covers, and professional circuit routing is used to prevent water accumulation, so as to effectively deal with electrical faults caused by freezing and condensation

2 A good forklift should take all details into consideration to fully ensure the safety of the driver, cargo and the forklift itself

At present, electric transport trucks are widely used in shopping malls, airports, docks, warehouses, factories and other places

(1) When the BYD forklift is driving, the bottom of the fork should be kept 300-400mm above the ground and the mast should be tilted backward The three verticals and three horizontals in the "New Energy Vehicle Industry Development Plan (2021-2035)", the "three verticals" refer to pure electric vehicles, plug-in hybrid vehicles, and fuel cell vehicles

BYD Ride-On Forklift Contact Information-

They are suitable for use in warehouses, supermarkets, cold chains, logistics, docks and other places

Non-drivers are strictly prohibited from sitting on the forklift while the vehicle is in motion

②Maintain good ventilation during charging, and smoking and using open flames are strictly prohibited

After the forklift has been operating for a specified period of time, it should leave the cold storage and rest and replace the battery in the buffer zone

The high-pressure oil first flows into the synchronous motor from the oil inlet channel through the oil pump, and then the hydraulic oil is forced to be divided into 4 paths through the meshing gears in the synchronous motor, supplying oil to each cylinder with equal flow, realizing the synchronization of the hydraulic system

Is only horizontal transportation required, or is there stacking, picking, or sorting? Is the transported item special (barrel-shaped, such as in the paper industry)? The tonnage of the forklift required, the lifting height, the fork length, and the number of mast levels

(CATL)

(3) Parking: Stop the forklift by releasing the travel direction switch and returning it to the neutral position

PU polyurethane wheel: iron core coated with rubber, quiet, good wear resistance, not easy to damage the ground, suitable for painted floors

The auxiliary wheels are usually screwed on and can be replaced by loosening the screws

The cold resistance reaches minus 40℃, and it can work normally under high temperature to 60℃

Of course, some basic models will account for the majority of sales, but other special models will also develop well in the market segments

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info