欧美xxxxbbbb,国产精品69久久久久水密桃,韩国xxxx做受gayxxxx

BYD warehouse truck maintenance schedule-

("Zhengzhou Jiachen") to promote the technical advantages of its electric forklifts, warehouse vehicles and intelligent industrial vehicles in motor control, battery management, and integrated control of the whole machine, and continuously improve the product quality and core competitiveness

If it is lower than the limited working voltage, the forklift should stop running immediately

On the basis of primer spraying, the iron plate of the body can be sprayed with a low-temperature rust-resistant protective layer to cope with the huge temperature difference in the storage operation

After lifting the goods, it is strictly forbidden to stand under the fork; 8

Whether purchasing an electric transport truck, an electric stacker or a manual hydraulic forklift, in addition to considering its own site, environment and other conditions as well as requirements for battery life, product quality, etc When the electric transport truck is not in use, put the fork to the bottom and store it in a designated location without affecting other operations

What should we do if the electric pallet truck makes an unusual noise? The truck manufacturer will tell you about it

Prototype test results According to the prototype test plan, the test results meet the requirements: The performance parameters of the test prototype meet the design requirements, and the commissioning personnel achieve its basic performance through testing

Anti-accidental safety switch The operator faces the fork and the direction of the cargo

Light working conditions, heavy working conditions

The explosion-proof electric transporter has a complete driving system, fast response, precise and easy control, stable operation, and more convenient transportation

Different types of equipment have relatively large differences in configuration and parameters, and are suitable for different places of use

7Work cycle time Automatically guide the electric truck to complete the work cycle time required

Battery compatibility: Batteries of electric forklifts of various brands are interchangeable, so the original batteries can still be used, allowing the components to maintain a longer service life

BYD warehouse truck maintenance schedule-

First of all, we must find out the cause of the abnormal noise

When the product is in use, the rated load should be larger than the actual load, so that the electric transport truck will be more durable and have a longer life

The advantage of electric drive is that it saves a lot of labor and is more efficient than manual labor

First of all, we must find out the cause of the abnormal noise Electric truck manufacturers recommend that we have many specifications of electric pallet trucks, each with its own characteristics, and choose carefully

Second-hand products cannot be guaranteed, so we need to make a careful comparison before purchasing to avoid pitfalls

The indoor use of the vehicle is very important

There are three operating modes: walking, standing and riding

The timer and power meter are standard to remind the operator to charge at the right time

So, how can we complete the forklift of goods well? Electric forklift manufacturers have prepared a detailed tutorial for everyone

The key parameters of unmanned forklifts involved in this article are shown in Table 1: Among them, in order to effectively reduce the width of the stacking channel, the minimum stacking channel width was reduced from the traditional 3 meters to 1

DC motor drive As a relatively cheap driving method, DC drive has been widely used in electric equipment for a long time, but it has some inherent defects in performance and maintenance

BYD warehouse truck maintenance schedule- Electric pallet trucks use electric hydraulic pumps for lifting and lowering, and use electronic control (chopper) or domestic resistance electronic control to adjust the travel speed

However, this data generally has a deviation of 100mm, so it is recommended that companies add 100mm when calculating

What are the maintenance methods for electric forklift masts? If the mast of an electric forklift is deformed, it will affect the safe operation of the forklift The price of imported forklift products is slightly higher

280g/cm3; adjust the engine oil in time, install insulation measures when the equipment is working on site, install oil preheating device when necessary, and start the engine regularly to preheat each part of the working system

In addition, there are also types such as hydraulic transporters and micro-diamond transporters

The greater the output of the same product, the lower the purchase cost of a single component will be

The push rod under the fork can be electrically adjusted to control the lowering height of the fork

Although the price is higher than that of internal combustion forklifts, its operating cost is lower than that of internal combustion forklifts

This solution supports cargo lifting heights of more than 8 meters

Clean the driving chain, bearings and add lubricating oil

Stay away from forklift operation areas (including the rack centralized placement area), specifically: (1) Do not take shortcuts and go directly through the forklift operation area; (2) Do not take a rest in the gap between the racks because you are tired; (3) When working with suppliers to confirm and inspect parts, do not use the forklift operation area for convenience

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info