一本岛在免费一二三区,国产精品久久久久久久久久久久 ,日韩电影免费在线

Where is the professional maintenance point for BYD lithium battery electric forklift?-

Solution to hydraulic synchronization problem In order to effectively improve the structural rigidity during high-position lifting, this lifting device is designed with two sets of telescopic masts, involving 4 oil cylinders

They are made of polyethylene, formed in one go, stable and durable Combination of 5G and forklifts With the advent of China's 5G era, forklifts have taken another big step towards intelligence

When the battery electric flatbed truck is in operation, the most important thing is to maintain its battery

Check and adjust the battery sulfuric acid ratio, clean the battery surface, and tighten the battery terminals

Under the general trend of green environmental protection and intelligent manufacturing, more and more new energy forklifts have become the first choice

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads 3 When building a factory or placing new shelves, be sure to reserve a channel of appropriate width to prevent the electric forklift from being unable to turn, stack goods, or pick up and place goods, which affects work efficiency and is time-consuming and laborious to adjust Low operating cost With the increase in international oil prices, the operating cost of electric forklifts is lower than that of fuel forklifts The weight is gradually increased according to the load capacity of the prototype, and the lifting capacity and high-position side fork tests are performed under different loads

(3) Release the operating arm and it will automatically return to the parking brake position

Management inspection ① Forklifts should be regularly maintained and inspected to prevent fatigue and wear of parts, and to detect potential hidden dangers in time before serious damage occurs

Where is the professional maintenance point for BYD lithium battery electric forklift?-

4 stop precision When the AGV reaches the target address and is ready to automatically cut, the error value (mm) between the actual position and the position set by the program

Customized equipment transportation plans, a high-tech enterprise integrating machinery and equipment research and development, manufacturing and sales

As the name suggests, an electric pallet truck is a type of truck that uses a battery as its power source and an electric motor as its motive force, while a manual pallet truck mainly relies on manpower to operate

In AC, you also need to distinguish between full AC and partial AC, because this involves the issue of subsequent maintenance costs

Strong safety: The explosion-proof electric forklift adopts an all-steel structure and the surface is coated with anti-corrosion paint

②Maintain good ventilation during charging, and smoking and using open flames are strictly prohibited

If it is reduced early, you can grab the market, but if it is reduced late, you can only passively follow (9) When the forklift is in operation, the load must be in the lowest position that does not hinder the driving, the mast should be tilted back appropriately, and the load must not be raised except when stacking or loading The pole coil is made of F-class insulation copper core wire and soaked in F-class three-proof paint

" In the early 1920s, electric reach trucks were introduced, followed by forklifts with gasoline engines and lifting devices

The indoor use of the vehicle is very important

AGV fully automatically and correctly guides transport vehicles

The emergence of lithium batteries has added highlights to the development of the forklift industry! In the future, forklift batteries will dominate and create a new future for warehousing and handling equipment

Where is the professional maintenance point for BYD lithium battery electric forklift?- 5 Electric pallet trucks are the main handling tools in warehousing and logistics They are widely used in the warehousing industry because of their compact body, flexible mobility, light weight and good environmental performance

At the same time, because electrical components are often contaminated with water vapor, short circuits, leakage and other accidents are prone to occur

Usually, the front overhang of an electric hydraulic forklift, the length of the forklift fork/pallet and the safety distance are all fixed values The neutralization position of the carbon brush has been adjusted on the test bench of the factory, and customers are not allowed to disassemble and adjust it at will A mast-reach-forklift refers to a forklift in which the mast drives the fork forward and extends it beyond the front wheel to pick up or put down the goods What are the operating procedures for electric forklifts? The current forklift field may already be the world of electric forklifts The indoor use of the vehicle is very important

They are especially suitable for food, fishery, medical, chemical and other places

Unmanned forklift: ① A sensor installation frame is designed on the loading platform, and a cargo size over-limit sensor is installed

They are more convincing than price and can help companies choose a high-quality electric transport truck

Why do forklifts still rust even though they follow the correct use and maintenance methods? Is it because the forklift is of poor quality? In fact, there are many reasons for forklift corrosion

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info