国产一区在线视频,亚洲福利视频在线,国产精品99久久久久久久久

BYD four-wheel electric forklift charging process picture- And the ambient temperature should not exceed 40℃ and should not be lower than -25℃ The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and increases the flexibility of operation

Make sure to check your surroundings and drive slowly when turning; 2

We must understand them clearly and make a good distinction when choosing 2 Manual forklift Manual forklifts are mainly designed for handling goods in warehouses Avoid using in blind areas; 9 A pallet truck is a type of warehousing logistics equipment used for cargo handling

Electrical component reliability The main measures taken for electrical components are to prevent freezing and rust

Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model

Different cold chain products have different requirements for cold storage temperature, which also determines the different grades of cold storage forklifts, as shown in Table 1 and Table 2

Including: retail logistics circle, manufacturing logistics circle, clothing logistics circle, home furnishing logistics circle, logistics equipment circle

They are generally small and use hydraulic structures to reduce the difficulty of manual operation

BYD four-wheel electric forklift charging process picture- Since lithium batteries use non-aqueous electrolyte solutions, there is no need to check and add electrolytes

Driving and driving are not suitable for simultaneous development

6 operating speed Automatically guiding the maximum speed that an electric truck can achieve when driving under a rated load is an important parameter that determines the vehicle's operating cycle and transportation efficiency It is strictly forbidden to stand above or below the forks, and it is not allowed to use a single fork to pick up goods that are too high to be loaded

The battery is the power source of the vehicle and should be charged in time and maintained regularly

Before working every day, you should first check the following safety features: ※ The speaker functions normally

When we usually repair forklifts, we often find that many customers' forklifts are rusted or even corroded

Therefore, the use of explosion-proof electric forklift in specific occasions is necessary, and safe operation measures are also indispensable

(4) Maintenance-free: Iron batteries can avoid the maintenance of lead-acid batteries during use, such as the loss of electrolyte

Cause: Charger failure, electrical circuit failure, etc

The configurations are different

The advantage of electric drive is that it saves a lot of labor and is more efficient than manual labor

When turning the electric pallet truck, pay attention to whether the operation is smooth, whether there is any abnormal sound, whether lubrication is needed, etc

However, one thing that cannot be ignored is that the difference between manual pallet trucks and electric hydraulic trucks is that they are pulled by human power, which consumes a lot of manpower, especially on uneven ground, which is more labor-intensive and has low handling efficiency

BYD four-wheel electric forklift charging process picture- For a battery forklift, the first thing to consider is whether to choose a DC motor or an AC motor The era of manual handling is gone forever, so the purchase of electric forklifts is an inevitable result Especially for warehouse trucks, the warehouse has a small forklift space, a dim environment, and a severely obstructed vision

Advantages of unmanned forklifts With the improvement of my country's intelligent technology, my country's intelligent control system can also dispatch hundreds of unmanned forklifts at the same time

The electric transporter manufacturer tells you that when the speed is adjusted to the rabbit speed, it is suitable for use in wide places with few people and suitable for driving longer distances

Types of forklift wheels: Forklifts are basically divided into drive wheels, load-bearing wheels, and auxiliary wheels

Its smart handle integrates all switch buttons in the best reach position for easy operation

If you still have any questions about electric forklifts, it is recommended that you consult the electric forklift manufacturer

As efficient equipment for stacking, loading and unloading and short-distance transportation, they have greatly improved labor productivity and played an important role in economic development In terms of the sturdiness of the pallet, the nine-leg and Sichuan-shaped pallets are most suitable for electric transport trucks 4

After installation, check whether the screws and elastic pins are installed in place and whether the wheel installation position is correct and not loose

The principle of lifting goods on a fully electric pallet truck is the same as that of a semi-electric pallet truck

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info