国产精品入口免费麻豆,久久成人av网站,激情综合一区二区三区

BYD new energy forklift maintenance regulations content -

Hydraulic oil, gear oil, and lubricating oil all use special low temperature resistant grease, which can enable the vehicle to obtain long-term stable hydraulic and transmission performance in the cold storage

When picking up materials from the loading area, the action flow is shown in Figure 1-(a)

In the new "Technical Safety Regulations for Special Motor Vehicles in Factories" (TSG 81-2022), the regular inspection cycle of forklifts will be adjusted from the original 1 year to 2 years

Except for a few warehouse forklifts (such as manual pallet forklifts) that are powered by manpower, the others are driven by electric motors

It is understood that in the 5th "China Industrial Vehicle Innovation Award" (CITIA) (Parts, Management and Services Category) review activity initiated and organized by the Industrial Vehicle Branch of the China Construction Machinery Industry Association in 2019, Hangzhou Hangcha Axle Box Co

If an enterprise wants to choose the most cost-effective electric warehouse forklift, it must first see how much load it needs, and then choose which type of forklift to use

The above are two common problems with the plates of all-electric transporter batteries

All operating functions can be easily achieved with simple buttons on the handle The maintenance time is also much less than that of diesel forklifts, which can greatly save maintenance labor costs and effectively shorten the downtime of forklifts, which is conducive to improving the working efficiency of forklifts and improving economic benefits

Do not charge when there is no electricity or the power is too low, and do not overcharge for a long time, otherwise it will cause greater damage to the battery; What should I pay attention to when using an electric transport truck? 2

(20 Lower the fork to the lowest position so that there is no system pressure in the hydraulic system

The lifting device also comes from the motor to drive the hydraulic pump station to push the hydraulic oil inside the hydraulic cylinder to achieve lifting, rising and falling

Automation level of electric trucks and manual trucks Electric transport trucks are mainly used to transport goods quickly

Check the headlights; 4

BYD new energy forklift maintenance regulations content -

In addition, the heat of AC motors mainly occurs in the stator coils of the motor housing, which is convenient for cooling and heat dissipation

Battery intelligent management is an electronic component for real-time monitoring, automatic balancing, and intelligent battery charging

Electric transport trucks can be said to be indispensable equipment in warehousing and transportation

If companies want to know more about all-electric transport trucks, they can contact electric forklift manufacturers

3 After confirming that there is no abnormality in the safety detection sensor at the loading point, the loading platform is lifted to the corresponding height

When operating a reach truck, try to use less long-term and long-distance acceleration

, which mainly develops and produces power battery systems (lithium-ion) for off-road vehicles

(3) During the loading and unloading process, the forklift must be braked

With the rapid development of industrialization, the scope of forklift use is expanding day by day

Core data of this article: Electric forklift production volume, electric forklift consumption volume, forklift market electrification rate An electric forklift is a forklift that uses batteries as the source of power to drive the travel motor and hydraulic system motor to achieve travel and loading and unloading operations

Check whether all standard parts are tightened

Take BYD forklifts as an example

BYD new energy forklift maintenance regulations content -

It is strictly forbidden to stand above or below the forks, and it is not allowed to use a single fork to pick up goods that are too high to be loaded

0SD will replace the current Hyster P2

Pay attention to the driving system and whether the sound of the steering system is normal

Oil replacement in hydraulic system We recommend that you replace the hydraulic oil once the machine is in operation (or when the operation time reaches 2000 hours), using 45# high-strength hydraulic oil or similar oil

It is suitable for operations in workshops and warehouses

0 to 45

Among them, the corrosive environment inside the forklift, such as the high temperature generated by the engine and the combustion exhaust gas containing sulfur and chloride ions, the acid mist and leakage generated by the battery, the stress generated by vibration and impact during operation, and the local damage caused by friction and collision are the main reasons for the corrosion damage of forklift parts

When the forklift stops working and you get off the vehicle, you must turn off the engine, remove the key, and pull the handbrake; 4

For example, for instruments with electric heating, waterproof connectors and electrical connector terminals are matched with rubber covers, and professional circuit routing is used to prevent water accumulation, so as to effectively deal with electrical faults caused by freezing and condensation

Power socket assembly When charging the battery, unplug the socket with the handle and plug it into the plug on the charger

Once the battery has problems, the all-electric transporter will not work properly

When loading and unloading goods, dragging the pallet on the ground will cause scratches on the ground

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info