欧美另类交视频,中文字幕在线免费专区,国产视频2区

BYD forward electric stacker maintenance item record sheet -

Manipulator arm During driving, the electric pallet truck is controlled by the manipulator arm to travel and turn, and the maximum turning angle of the manipulator arm is about 180 degrees

The new Hyster stacker can handle loads up to 2 tons, can achieve double-sided pallet stacking and handle open palletized loads, as well as transport and load or unload pallets stacked two high on a trailer

Environmental protection, hygiene and high safety: The shell material is made of ABS engineering plastic or aluminum alloy, which meets the requirements of EU ROHS standards

After-sales service is the key, and you must choose a brand with good after-sales service

The operator must be familiar with the condition of the vehicle before use, and must not allow unsupervised personnel to operate it at will; 3

In life, we think whether electric forklifts are worth buying is a very objective question

Longer service life: The power module is made of imported high-quality lithium batteries, chargers and controllers, and is made of one-time injection molding technology

Manual trucks use a manual hydraulic pump to lift and lower the equipment through manpower, while electric trucks use a power source battery, a drive motor, and a drive wheel to achieve lifting and lowering

(2) Check the entire vehicle for oil and water leakage (3) Check the working conditions of various instruments, signals, lighting, switches, buttons and other auxiliary equipment (4) Check whether the engine is abnormal and whether it is working normally (5) Check the technical condition and tightness of steering, brakes, tires and traction devices (6) Check the technical condition and fastening condition of the lifting mechanism, tilting mechanism, fork frame and hydraulic transmission system

The air gap can be adjusted multiple times When the road surface is uneven and has a slope, it will cause serious wear and tear on the wheels and motor of the 3-ton electric forklift 2

BYD forward electric stacker maintenance item record sheet -

The load center distance of the electric forklift of the electric forklift manufacturer is 500mm

"Customer-oriented, technological breakthrough" In the face of this challenge, we worked with customers to conduct a comprehensive analysis and evaluation of the power drive of electric forklifts

It is very necessary to add a camera behind the forklift to give the driver an eye, which greatly helps the driver to avoid collision when reversing When the truck starts, make sure there is no one nearby and no obstacles or potholes on the road

■ High power The dual-motor integrated design greatly improves the load capacity of the electric forklift

Relevant data show that after years of technological accumulation and continuous R&D investment, domestic brands have gradually aligned their product line integrity and technical quality management with international industry standards, and are cost-effective Cab and interior heating When working in a low-temperature or even ultra-low-temperature cold storage, the cab should be equipped to improve the working environment The handling work that originally required dozens of people to complete can now be completed by a few forklifts and a few people ② Check and tighten any screws, nuts, and battery cable connections that may be loose

Have work experience suitable for the type of special equipment operation for which the forklift license is applied; 5

Driving and driving are not suitable for simultaneous development

When enterprises choose warehousing and logistics equipment, there are many factors that need to be considered

(2) Turn the key switch to the on position

BYD forward electric stacker maintenance item record sheet -

(3) Release the operating arm and it will automatically return to the parking brake position

After starting the electric transport truck normally, press the handle of the electric transport truck with both hands to between 90° and 180°

The electric truck uses a battery as the power source

Electric truck manufacturers hope that everyone will pay attention to this

Check before use: (1) Check whether the fuel, lubricating oil, hydraulic oil and coolant are sufficient

, Hangcha Group Co

The following is shared by the new energy forklift editor: What kind of faults usually occur when electric forklifts are in use? 1

Impact of low temperature environment on hydraulic system Hydraulic oil used at room temperature is prone to freezing in low-temperature environments, requiring the viscosity of the hydraulic oil to be higher than that of ordinary hydraulic oil; in addition, hydraulic high-pressure hoses are also prone to fatigue, brittleness and hardening at low temperatures

Each thing has its own use Let's not talk about other things When using an electric transport truck, pay attention to the function of each button

AC controller, with excellent quality and performance, has functions of cyclic braking, reverse braking and multiple adjustable parameters, which can make the movement performance of the whole vehicle reach the best state under different operating conditions

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info