色综合一区二区,欧美成人猛片aaaaaaa,久操久操久操

BYD warehouse dedicated electric forklift maintenance content and standard pictures- Driving operation: 1

Environmental protection, hygiene and high safety: The shell material is made of ABS engineering plastic or aluminum alloy, which meets the requirements of EU ROHS standards

The former is electrically controlled for driving and lifting, which is more labor-saving

The temperature of the buffer zone should be kept at around 0°C and the humidity should be kept below 40%

It is preliminarily estimated that the national output of electric forklifts in 2020 will be about 380,000 units

② Raise the fork to the top position to check whether the hydraulic oil in the hydraulic system is sufficient

The carbon brush should be replaced according to the damage of the carbon brush

75 times, the motor can work normally

Because the vehicle's walking and steering adjustment adopts electric 360-degree steering, it has the characteristics of energy-saving, high efficiency, stable product operation, easy to use, reliable, low noise, and zero pollution

There is an emergency power-off button on the vehicle body, and there are lift buttons and forward/reverse buttons on the handle

(5) It is strictly forbidden to shut down the engine and coast downhill with an internal combustion forklift Improper installation of the seal ring on the exhaust valve guide of the electric pallet truck will cause the exhaust pipe to drip oil and make some noise They are widely used in national economic sectors such as stations, ports, airports, factories, warehouses, etc Electric forklift manufacturers adjust speed, which is relatively complicated, has high requirements for AC operation, must be used for a long time, and the price is also high Let's take a look! 1

BYD warehouse dedicated electric forklift maintenance content and standard pictures- It has stronger power and can completely replace internal combustion forklifts

When entering and leaving factories, workshops, and warehouses, the speed should not exceed 5km/h

Power socket assembly When charging the battery, unplug the socket with the handle and plug it into the plug on the charger

It takes a certain amount of time to load and unload goods, and it consumes manpower, is inefficient, and prolongs its usage time This section proposes solutions from the two aspects of mechanical structure and hydraulic system The hydraulic pump outputs high-pressure oil (6 It is suitable for use in small spaces

The minimum turning radius refers to the minimum distance from the outermost and innermost sides of the vehicle body to the center of the turn when the electric forklift is unloaded, driving at a low speed, and turning the steering wheel fully

The structure of electric forklifts: The body is the main structure of the forklift, which is generally made of steel plates of more than 5mm Some worked hard on the appearance, some improved the workmanship, some strengthened the performance, and some worked hard on the cost

(4) When a forklift approaches or removes objects, the vehicle speed should be slow and steady, and care should be taken not to crush objects, wooden mats, etc

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

When the inspection agency conducts regular (initial) inspections, the inspection items should include the inspection of safety monitoring devices

BYD warehouse dedicated electric forklift maintenance content and standard pictures- Before repair, calibrate the mast of the electric forklift to maintain its inherent straightness

(8) When operating, forklifts must comply with factory traffic regulations and maintain a certain safe distance from the vehicle in front

5-2 tons, including stacker, transporter, stacker, three-way stacker, and high-bay stacker

Today, the market is becoming more and more mature, and manual pallet trucks are comfortable, labor-saving and money-saving, and can be called economical and easy-to-use handling tools

It focuses on the use needs of different industries, conducts in-depth research and development, and provides the most suitable industry-customized product services

If the company urgently needs an electric pallet truck to be put into work, it can directly find professional maintenance personnel or consult the truck manufacturer

When cracks appear in the welding parts of the body of the electric pallet truck, secondary welding should be carried out in time

If other personnel at the work site do not keep a safe distance from the forklift, they must stop working immediately; 2

Controlling the operating speed can control the magnitude of the travel motor force

For example, the second-generation new electric high-speed pallet truck PTP20S perfectly combines the usage habits, working conditions and handling requirements of European customers, and designs a flip-up guardrail

As early as 2015, the "Guiding Opinions on Accelerating the Development of Life Service Industry and Promoting the Upgrading of Consumption Structure" issued by the State Council clearly pointed out: Actively develop new logistics service models such as cold chain logistics and integrated warehousing and distribution

Driven by profit, many unscrupulous merchants have appeared in the market

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info