国产免费1000拍拍拍,四虎.com,亚洲成人偷拍自拍

BYD counterbalanced battery forklift charging process video -

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and improves the flexibility of operation

Check the hydraulic pump, oil pipe, joints and oil seals to see if there is any oil leakage

This parameter is very important and is the key to determine the cutting method according to different cutting methods

The fully electric pallet truck is powered by electricity

Its implementation principle is basically the same as that of a general electric forklift, but there are obvious differences in design and component selection

Power Management: Equipped with the world's leading power management system to monitor the battery in real time, perform high-precision calculations on the charge status, ensure that the battery is always working in a safe state, and increase the battery cycle

In addition, the antifreeze plug is loose, the oil pan is flooded, and the crankshaft gear is damaged due to early collisions, and it is easy to find bulges

If the water level is lower than the standard level, distilled water should be added appropriately

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

The body design of the electric transport truck is suitable for the workplace and has a good service life

They are made of polyethylene, formed in one go, stable and durable

(3) Hydraulic pump, which can be a vane pump Or gear pump

Note: If the fully electric pallet truck works in a cold and humid environment, it should be equipped with low-temperature oil to adapt to the environment

BYD counterbalanced battery forklift charging process video - Since the unmanned forklift is very flexible, it can make full use of the existing space and site for transportation work when there are no obstacles on the ground BYD forklifts are equipped with lithium iron phosphate batteries independently developed by the company, which have set off a clean energy storm in the industry and become a symbol of the industry's new energy forklifts For example, the height of the warehouse door should be higher than the height of the entire forklift; after the goods are lifted to a certain height, what is the actual rated load of the electric forklift; consider how much weight each square meter of the floor can bear; it is also necessary to consider the road surface

One common sign is abnormal noise

It is not allowed to use inertia to unload; 3

Impact of low temperature environment on mechanical system Lubricating oil and grease used at room temperature will also change their properties at low temperatures and are not suitable for use in cold storage environments; specially designed accessories are also required on precision components such as micro-openings, sensors, precision bearings, etc

Fault 5: Power consumption is fast and cannot be charged Check whether the battery solution of the electric transport truck is sufficient, and add distilled water or lead-acid water in time; check whether the battery is aging, and replace it with a new one in time; check whether the equipment charger is faulty, and use a charger that matches the equipment model

This machine has an ultra-thin body design, stepless speed change, a very small turning radius, a solid body, light and flexible movements, no noise, no pollution, a long working time on a single charge, and reliable performance 1 Consideration of the company's own costs After many R&D improvements, the durability, reliability and applicability of electric forklifts have been significantly improved, completely surpassing internal combustion forklifts are all protected to reduce the occurrence of faults The speed limit when carrying goods in the warehouse is 5KM/h Check the automatic gearbox system, replace the automatic gearbox and filter 5

Maintenance-free: no need to add water, no pollution such as dripping, corrosion, etc

BYD counterbalanced battery forklift charging process video - Electric forklift manufacturers remind everyone that the last step must not be ignored

And the ambient temperature should not exceed 40℃ and should not be lower than -25℃

When loading and unloading goods, dragging the pallet on the ground will cause scratches on the ground

The oil pump is excessively worn, causing internal leakage of the equipment, and needs to be replaced

We see on TV that there is a kind of transport vehicle in many warehouses

Check the appearance

When the thickness of the friction brake pad reaches the minimum thickness allowed, the friction brake disc must be replaced

During normal use, pay attention to the insulation of the battery

The function of the outriggers is to ensure the stability of the forklift when loaded

Electric transport trucks can be said to be indispensable equipment in warehousing and transportation

According to different cold storage vehicle grades, operate in the cold storage according to the standard sustainable working time 3

Technical parameters of portable lifting forklift: Name: Electric hydraulic lift forklift Model: ND-500J Battery: 48V12ah Motor: 500W Weight: 115kg Loading capacity: 500kg Fork length: 924mm Total size when unfolded: 1950X575X1290mm Rated load: 500kg Maximum load: 500kg Working voltage: 48v 2

We always take meeting customer requirements as our business philosophy, strictly control quality, strive to improve work efficiency, and strive to provide individuals or companies with electric trucks that meet market needs

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info