欧美精品se,欧美黑人双插,久久精品伊人

BYD Lithium Forklift Does Not Move-

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

For example, for instruments with electric heating, waterproof connectors and electrical connector terminals are matched with rubber covers, and professional circuit routing is used to prevent water accumulation, so as to effectively deal with electrical faults caused by freezing and condensation Nylon wheels: They are mostly used in low-speed vehicles such as manual transport trucks

Cab and interior heating When working in a low-temperature or even ultra-low-temperature cold storage, the cab should be equipped to improve the working environment

After AGV technology is widely used in counterbalanced forklifts, the performance of this type of vehicle has been greatly improved

Compared with internal combustion forklifts, reach stackers have the advantages of easy operation, energy saving and environmental protection When the ambient temperature is 40℃, the relative humidity should not exceed 50%

Large capacity batteries to ensure long working time

In 2019, Hangcha Group clearly proposed a high-end, electrified, and intelligent product strategy, and achieved sustained growth by relying on advanced product layout and market expansion

of the forklift

The results show that the side stacking unmanned forklift designed based on the scheme in this paper effectively reduces the width of the stacking channel and improves the storage capacity and storage efficiency

As the main model of traditional forklifts, counterbalanced forklifts have long occupied half of the forklift market with their unique advantages

BYD Lithium Forklift Does Not Move-

As long as it can solve the user's pain points, all kinds of strange configurations are available

At work, we must strictly abide by the regulations put forward by the transporter manufacturer and operate the all-electric transporter in a standardized manner, so as to extend its service life and reduce safety hazards

Cause: The charger operating voltage is out of regulation or faulty

According to relevant logistics industry insiders, forklifts need to have high-intensity performance, are not prone to failure, and can ensure the intensity of sustainable operations

More and more people tend to buy a variety of convenient products

Lifting structure The lifting structure is mainly composed of a gantry and a fork

The driver has to stretch his neck to barely find the correct position based on experience! If it is not accurate, the goods will tip over

What should we do if the electric pallet truck makes an unusual noise? The truck manufacturer will tell you about it

Secondly, when picking up goods, the fork must be in place, one side of the goods must be attached to the fork, and the direction must be straight and not tilted

The market share of manual trucks and internal combustion forklifts has gradually declined (6) It is prohibited to pick up goods with a fork at high speed or to use the fork to collide with hard objects (3) During the loading and unloading process, the forklift must be braked

BYD Lithium Forklift Does Not Move-

However, electric pallet trucks are much more expensive than manual trucks, and they take time to charge

The oil pumps and valves of the hydraulic system are all packaged at low temperatures, and the hydraulic hoses are made of low-temperature resistant rubber materials to effectively prevent hose degradation and hydraulic function abnormalities caused by low temperatures; in addition, due to the change of the hydraulic working oil, the viscosity of the hydraulic working oil also changes at low temperatures, so the hydraulic oil pump used for lifting should also use an ultra-low temperature hydraulic oil pump

When the vehicle starts and the speed increases, keep the accelerator pedal steady

Not only electric pallet trucks, but also electric forklifts and electric stackers, enterprises must consider whether they are safe

Once a dimension tolerance occurs, the unmanned forklift stops and the system alarms

As the main model of traditional forklifts, counterbalanced forklifts have long occupied half of the forklift market with their unique advantages

It starts with one button and releases pressure with a foot pedal

At the same time, more and more companies began to enter the field of electric forklifts, and made continuous breakthroughs and diversified innovations around the core technologies and products of electric forklifts, which promoted the further improvement of the level of domestic electric forklifts

When performing fill welding, it is recommended to use DC reverse polarity arc welding The future trend is clear The industry generally believes that with the country and society increasing environmental protection standards for corporate production and the change in economic development model, forklift electrification is a major trend in the future

When the electric truck is not running smoothly or making unusual noises, check whether there are any problems with the vehicle components

It has low electrostatic induction power, strong anti-interference ability, and stable and reliable operation

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info