99精品久久只有精品,91高清国产,91精品婷婷色在线观看

<ul id="6yoq2"></ul>

Product

Select a product to view

BYD Forklift

Core Features

BYD forklifts can easily handle any working conditions

High security

Turning speed limit Hill climbing protection Overload protection

high performance

Fast driving speed, fast lifting speed, strong climbing ability

High efficiency

Fast charging, power saving, multi-shift operation

High Match

Relying on the company's advanced battery, motor, electronic control, hydraulic system and other core technologies to create the ultimate vehicle performance

Low overall cost

Five-year data shows that detailed statistics on maintenance costs, operating costs, purchase costs, etc. can save 80% of costs compared to fuel forklifts and 30% of costs compared to lead-acid battery forklifts.

Super fast charging

Through disruptive battery and fast charging technology, charging time can be shortened by 90%, reducing waiting time, improving efficiency and creating unlimited battery life

Ultra-long life

BYD lithium battery has a capacity retention rate of more than 65% after 4,000 cycles of charge and discharge under normal charge and discharge conditions, and no battery replacement is required during the life cycle.

No charging room required

No need for charging room No need to add electrolyte No need for backup battery Change the forklift management mode and cope with various working environments calmly

BYD Forklift Electric Stacker Operation Video-

Comply with other requirements stipulated in the Safety Technical Specifications for Special Equipment Operators of Forklift Certificates

The greater the output of the same product, the lower the purchase cost of a single component will be

The minimum right-angle passing width refers to the minimum width required for an electric forklift to travel to a right-angle curve

(7) When the vehicle is carrying cargo and traveling uphill or downhill at an angle exceeding 7 degrees and at a speed higher than first gear, the brakes must not be used unless in special circumstances

When building a factory or placing new shelves, be sure to reserve a channel of appropriate width to prevent the electric forklift from being unable to turn, stack goods, or pick up and place goods, which affects work efficiency and is time-consuming and laborious to adjust

Make more comparisons and choose the one that suits you best and has the best cost-effectiveness As early as 2015, the "Guiding Opinions on Accelerating the Development of Life Service Industry and Promoting the Upgrading of Consumption Structure" issued by the State Council clearly pointed out: Actively develop new logistics service models such as cold chain logistics and integrated warehousing and distribution

In response to this, some companies should design vehicles according to the specifications of lithium batteries, making the vehicle more compact and more convenient to operate

5-5 tons

Avoid overloading or partial loading of goods

Shorten the maintenance cycle of lubrication points to prevent early wear of lubrication points

The masts are generally divided into standard, two-section or three-section types (10) It is not allowed to use the inertia of braking to release objects

BYD Forklift Electric Stacker Operation Video-

Lithium batteries save more than 40% of electricity

Chain components 1 If the air gap exceeds the maximum air gap value, it may cause the brake to fail to release, the friction brake pad to burn out, the braking force or holding force to decrease, and even cause a major accident Principles of forklift selection 1

Since each set of batteries generally needs to be charged after about 8 hours of work, backup batteries are required for multi-shift working conditions

The door frame shall not be deformed or welded off

Forklifts can be divided into three categories: internal combustion forklifts, electric forklifts and warehouse forklifts

They rely on human transportation and handle operation, which is simple and flexible, environmentally friendly and energy-saving

The product used in this solution is the 610X in the 600 series wheel drive planetary gearbox, which best meets customer needs and can be connected to high power density electric motors

The rapid development of electronic control technology has made the operation of electric forklifts more and more comfortable, with a wider range of applications and more and more solutions to logistics

If you directly charge a battery with frozen electrolyte, it may explode

In addition, each supplier will emphasize some technical innovation and design in the security protection details of their products, but as long as the previous ones are basically determined, these are things to be considered based on the procurement costs

Some leading forklift companies with keen market sense have also quickly captured this trend and have taken action

BYD Forklift Electric Stacker Operation Video- Overall, economical electric walk-behind warehouse forklifts account for a large proportion, which is mainly due to multiple factors such as cost control and machine replacement in the downstream demand market3%; among them, domestic sales volume was 151,000 units, a year-on-year increase of 58 There are four inspection windows at the commutator end of the railway train motor for regular inspection and maintenance of the motor commutator and replacement of brushes

Electric forklift manufacturers remind that there are many things that companies need to pay attention to when purchasing a 3-ton electric forklift

One is screw connection, which is relatively simple

5T, 3T; the choice of purchasing configuration depends on the weight of the goods and the maximum fork height

What are they? Common power system failures are mainly manifested in failure to charge, charging voltage is too low, and charging voltage is too high

The high-quality electronic control system is easy to use and can be controlled easily

Electric trucks save time, effort, energy, cost and efficient operation

If there is any abnormal sound, perform fault detection in time and do not operate with faults

Excellent hydraulic station, low noise, small vibration, good sealing performance, automatic adjustment of no-load and full-load lowering speed to ensure smooth lifting and lowering

Forklift bearing broken The forklift bearing is a very important hardware component on the forklift

2 What are the advantages of lithium batteries? 1

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info