欧美亚洲视频,欧美色xxx,欧美图片欧美激情欧美精品

What are the requirements for maintenance of BYD workshop special forklifts?-

At present, electric transport trucks are widely used in shopping malls, airports, docks, warehouses, factories and other places

Nylon wheels: They are mostly used in low-speed vehicles such as manual transport trucks

1-day inspection ① Check whether the battery is fully charged (you can also check the side surface of the battery)

The forks of the counterbalanced forklift are outside the centerline of the front wheels

Turn (1) Steering is controlled by a control arm, and the steering angle can be anywhere within the range of 90° in both the left and right directions

In the cold chain logistics system, forklifts play an important role in the transfer link of storage and transportation

The push rod under the fork can be electrically adjusted to control the lowering height of the fork

Electric forklifts have different load capacities

Before parking, be sure to adjust the height of the gear to about 10CM above the ground (not higher than 15CM and not lower than 5CM), tilt the tip of the gear downward, brake the car, and turn off the power

Now, the electric forklift manufacturer will tell you what are the characteristics of the full-electric transport truck

2 3

What are the requirements for maintenance of BYD workshop special forklifts?-

Now, the electric forklift manufacturer will tell you what are the characteristics of the full-electric transport truck

The following is shared by BYD Forklift Editor: 1

Load test: The four loads have the same load center distance, and the weight is gradually increased according to 50%, 70%, 100%, and 120% of their own load capacity

Before lifting the forklift, make sure the forklift is fully inserted into the bottom of the pallet

Reversing 1

The steering angle of the handle is greater than 180 degrees, and the vehicle body is shorter, which makes the turning radius of the vehicle smaller and increases the flexibility of operation

In order to help companies save space to the greatest extent, electric forklift manufacturers often design the tail of the forklift into an arc shape with a turning center as the core

In 2019, Anhui Heli continued to deepen its electrification layout and invested 300 million yuan to build a "new energy vehicle and key parts construction project"

There is no environmental pollution, and it can meet the requirements of more application scenarios, expand the scope of application, and increase more business opportunities; 4

The part structure is mainly used for the implementation of protection technology, and the process holes can be opened when necessary

Light working conditions, heavy working conditions

It can be driven electrically, but it requires manual lifting by our operators, which is more convenient and quick to operate

The front lifting gantry 1 and the rear lifting gantry 2 have the same structural principle, wherein the front lifting gantry 1 is composed of an inner movable gantry 11, an outer fixed gantry 12, and a slide 13; the inner movable gantry 11 is composed of a movable pulley 111, a slide guide plate 112, an inner gantry guide plate 113, an inner gantry body 114, and an inner gantry guide wheel group 115; The external fixed gantry 12 is composed of an inner gantry side guide bearing group 121, an inner gantry middle guide bearing group 122, a lifting cylinder 123, an inner gantry fixed guide plate 124, and a bottom fixed shaft 125; the slide 13 is composed of a connecting channel steel 131, a slide body 132, a slide middle guide bearing 133, and a slide side guide bearing 134

What are the requirements for maintenance of BYD workshop special forklifts?- If it is a long-term rental (more than one month), the price will be appropriately discounted

In 2019, Hangcha Group clearly proposed a high-end, electrified, and intelligent product strategy, and achieved sustained growth by relying on advanced product layout and market expansion

The reduction in contacts can effectively reduce the maintenance cost of electronic components

At work, we must strictly abide by the regulations put forward by the transporter manufacturer and operate the all-electric transporter in a standardized manner, so as to extend its service life and reduce safety hazards

Daily maintenance: 1

2-week inspection Forklift users should spend a few minutes each week cleaning the machine, paying special attention to removing any entanglements such as silk, linen, and rags around the wheels and axles

As early as 2015, the "Guiding Opinions on Accelerating the Development of Life Service Industry and Promoting the Upgrading of Consumption Structure" issued by the State Council clearly pointed out: Actively develop new logistics service models such as cold chain logistics and integrated warehousing and distribution

Therefore, pharmaceutical warehousing logistics has high safety performance requirements for handling equipment and high handling efficiency requirements

In fact, most of the reasons here are man-made

When turning the buttons, pay attention and do not turn violently and accelerate quickly

The following BYD Forklift Editor will introduce the specific maintenance techniques for electric forklifts

If the abnormal noise is caused by damaged parts, we can consult the truck manufacturer for repair or replacement

Forklifts are widely used in warehouses, factories, ports, airports and other scenes

At present, most lithium battery forklifts are still using lead-acid battery bodies, which do not give full play to the small size and high specific energy characteristics of lithium batteries

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info