欧美xxxx性,亚洲一区影音先锋,国产精品区一区二区三

BYD cold storage electric forklift charging process diagram-0 to 6

As we all know, the forklift industry is an important part of logistics and warehousing equipment

After years of development, the engine technology is relatively complete and the domestic price is not high

Especially in ports, warehousing, tobacco, food, textile and other industries, electric forklifts are gradually replacing internal combustion forklifts In response to the above problems, the safety inspection plan proposed in this section is as follows: Loading device: ① It is designed with a pallet positioning device and a cargo size over-limit sensor, which will issue an alarm signal when the cargo width, length, or height exceeds the limit; ② It is designed with a cargo overweight sensor, which will issue an alarm signal when the cargo is overweight; ③ It is designed with a cargo position over-tolerance detection sensor and a sensor for judging the presence or absence of cargo Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

Compared with imported electric trucks, domestic electric trucks generally do not have a power steering system installed

Braking (1) When the operating arm moves to the uppermost or lowermost end, the forklift is electrically braked

Batteries are used as the driving force for electric forklifts

Electric counterbalanced ride-on forklifts and electric ride-on warehouse forklifts still have a lot of room for improvement

When we opened Apollo, we all believed that the ecology must be open to the outside world

According to the analysis results of the global cold storage capacity report released by the International Association of Refrigerated Warehouses (IARW), the demand for cold storage forklifts is global; the three countries with the largest demand for cold storage forklifts in the world are India, the United States and China; the scale of cold storage development is proportional to the population size

BYD cold storage electric forklift charging process diagram-

With the continuous development, promotion and application of logistics technology, and the continuous improvement of the country's industrialization level, the scope of use of forklift products will be increasingly expanded, becoming a loading and unloading, warehousing and handling machinery with the largest output and specifications

The key processes of the entire production line are equipped with the industry's latest production equipment, and are also equipped with self-developed automatic assembly lines, representing the current leading level of equipment technology

2 times the maximum load, the relevant test data corresponding to the lifting capacity meet the on-site requirements, and the high-position fork entry is safe and reliable

, Ltd When the thickness of the friction brake pad reaches the minimum thickness allowed, the friction brake disc must be replaced

Finally, regardless of the price of the forklift, it is forbidden to use it in flammable, explosive places or corrosive environments with strong acidity or alkalinity

Usually, the front overhang of an electric hydraulic forklift, the length of the forklift fork/pallet and the safety distance are all fixed values

Braking (1) When the operating arm moves to the uppermost or lowermost end, the forklift is electrically braked The pole coil is made of F-class insulation copper core wire and soaked in F-class three-proof paint They have been tested and mass-produced by more than 30 vehicle companies including Anhui Heli, Hangcha Group, Longgong, Noli, Baoli, etc If the abnormal noise is caused by damaged parts, we can consult the truck manufacturer for repair or replacement

Fault 1: Jitter occurs when the motor is greatly increased When the electric transport truck is lifted significantly, there is gas inside the cylinder, causing shaking during lifting; the gas can be discharged by lifting the load multiple times; oil leakage in the hydraulic system can also cause shaking during lifting, so timely inspection and replacement of oil seals and hydraulic cylinder devices is required

BYD cold storage electric forklift charging process diagram-

First, battery consistency

The specific size and load range still need to be determined by the company according to its own needs and the model of the electric transport truck

Use brushless DC motor to control the drive system

If the temperature is significantly lower than -15℃, the engine system cannot be operated immediately after starting, but the engine should be run at 1000-1100r/min for 10-15min, and the transmission should be in a neutral position

Especially for warehouse trucks, the warehouse has a small forklift space, a dim environment, and a severely obstructed vision Overall, economical electric walk-behind warehouse forklifts account for a large proportion, which is mainly due to multiple factors such as cost control and machine replacement in the downstream demand market

It can be used immediately after charging, eliminating the time and safety risks of replacing batteries

Regardless of the price of the forklift, this can ensure the normal use of the electric forklift on the one hand, and on the other hand ensure that the battery can be charged normally and quickly after work

and Anhui Wannan Xinwei Motor Co

Battery and charger use and maintenance: 1

The operation and control of electric forklifts are simpler and more flexible

BYD forklift solutions for the logistics industry with high-intensity handling: In the logistics industry, cargo loading and unloading is a relatively normal part of the work

(2) Turn the key switch to the on position

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info