亚洲欧洲专区,国产精品免费视频二三区,亚洲在线www

BYD New Energy Electric Forklift Operating Procedures- Oil replacement in hydraulic system We recommend that you replace the hydraulic oil once the machine is in operation (or when the operation time reaches 2000 hours), using 45# high-strength hydraulic oil or similar oil If there is no abnormality during the retraction of the fork, after the fork returns to the middle position, in order to lower the center of gravity of the unmanned forklift, ensure the smooth and safe operation, and take into account the efficiency of cargo storage, the loading platform will fall back to 800mm above the ground 2

280g/cm3; adjust the engine oil in time, install insulation measures when the equipment is working on site, install oil preheating device when necessary, and start the engine regularly to preheat each part of the working system

We see on TV that there is a kind of transport vehicle in many warehouses

Many smaller manufacturers do not have such high requirements for forklifts, so they can choose relatively small electric forklift equipment, which can not only be carried with the vehicle, but also light in weight and occupies a smaller area

Forklift license examination requirements: At least 18 years old, in good health, meet the special requirements of the job applied for, have an educational level suitable for the job applied for, have work experience suitable for the job applied for, have corresponding safety and technical knowledge and skills, and meet other requirements specified in safety and technical specifications

They are especially suitable for food, fishery, medical, chemical and other places Parking (1) Release the direction select switch

, which are mainly used in docks, factories and other workplaces

Combination of 5G and forklifts With the advent of China's 5G era, forklifts have taken another big step towards intelligence The configurations are different There is a tortoise and rabbit adjuster on the handle, and the tortoise speed and rabbit speed can be switched freely

BYD New Energy Electric Forklift Operating Procedures-

Electric forklifts are more practical and recommended for purchase, but the batteries need to be well maintained and can be used for a relatively long time

Forklift driver's license, as the name implies, is a necessary professional certificate for forklift drivers

Abstract: In order to reduce the width of the stacking channel and improve the storage capacity and storage efficiency, this paper proposes a design scheme for a narrow channel side stacking unmanned forklift

Internal combustion forklift vs electric forklift Electric forklifts are electrically driven

(4) Maintenance-free: Iron batteries can avoid the maintenance of lead-acid batteries during use, such as the loss of electrolyte

During operation, the driving speed can be reasonably controlled to meet different usage rhythms

BYD forklift solutions for food grade stainless steel logistics and transportation: In the logistics industry, the food, pharmaceutical, and science industries have relatively high requirements for logistics equipment and work

Forklift wheel installation: 1

In the cold chain logistics system, forklifts play an important role in the transfer link of storage and transportation

Slow driving function: put the handle in a nearly vertical state, and the driving speed will automatically decrease, making it easier to operate in narrow spaces

When the vehicle is going down a slope, do not disconnect the circuit of the drive motor, but lightly step on the brake pedal to put the vehicle into a braking state, using the kinetic energy of the vehicle going down to reduce the energy consumption of the battery

Compared with internal combustion forklifts, the advantages of low noise and no exhaust emissions of electric forklifts have been recognized by the majority of users

However, as the country's environmental protection requirements continue to increase, the market demand for diesel forklifts will gradually decrease in the future

BYD New Energy Electric Forklift Operating Procedures-

Automation level of electric trucks and manual trucks Electric transport trucks are mainly used to transport goods quickly

8T, 2T, 2

There are several reasons for this phenomenon, usually three

For high lift, visual secondary positioning is added, and accurate picking and placing of goods can be achieved in a closed environment by binding the fork teeth and the shelf, effectively solving the errors caused by deformation of vehicles and shelves after many years

The operator must stay away from non-staff members in the counterbalanced forklift's working area and immediately issue a warning if there is any danger

Anti-accidental safety switch The operator faces the fork and the direction of the cargo

warn! Wheel slip is not allowed

As we all know, the forklift industry is an important part of logistics and warehousing equipment

Introduction With the rapid development of the intelligent logistics and warehousing industry, the solutions for intelligent three-dimensional warehousing are constantly being updated and upgraded towards high storage capacity, high storage efficiency and low cost

Therefore, it is necessary to regularly check and readjust the air gap, and pay attention to disconnecting the power supply of the equipment

An electric forklift with excellent quality and simple operation is also very important If the operator's hands or shoes are stained with oil, it is easy to make operating errors and cause the forklift to lose control, so the operator should wipe his hands or shoes dry before driving Therefore, pharmaceutical warehousing logistics has high safety performance requirements for handling equipment and high handling efficiency requirements

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info