狠狠色综合久久婷婷,国产精品99久久久久久久vr,91视频在线

<ul id="6yoq2"></ul>

Product

Select a product to view

BYD Forklift

Core Features

BYD forklifts can easily handle any working conditions

High security

Turning speed limit Hill climbing protection Overload protection

high performance

Fast driving speed, fast lifting speed, strong climbing ability

High efficiency

Fast charging, power saving, multi-shift operation

High Match

Relying on the company's advanced battery, motor, electronic control, hydraulic system and other core technologies to create the ultimate vehicle performance

Low overall cost

Five-year data shows that detailed statistics on maintenance costs, operating costs, purchase costs, etc. can save 80% of costs compared to fuel forklifts and 30% of costs compared to lead-acid battery forklifts.

Super fast charging

Through disruptive battery and fast charging technology, charging time can be shortened by 90%, reducing waiting time, improving efficiency and creating unlimited battery life

Ultra-long life

BYD lithium battery has a capacity retention rate of more than 65% after 4,000 cycles of charge and discharge under normal charge and discharge conditions, and no battery replacement is required during the life cycle.

No charging room required

No need for charging room No need to add electrolyte No need for backup battery Change the forklift management mode and cope with various working environments calmly

BYD CPD40 Warehouse forklifts Quote Speaker Press the horn to sound the horn Some leading forklift companies with keen market sense have also quickly captured this trend and have taken action Explosion-proof grade: Ex IIB T4 Gb 6

Fork deflection detection: When the fork is in the low position, measure the maximum deflection of the end corresponding to the maximum cantilever state under different loads

Try to turn it slowly

Since lithium batteries use non-aqueous electrolyte solutions, there is no need to check and add electrolytes

Benefits of BYD lithium battery electric forklift: Reduce logistics costs Long life: up to three times longer than traditional lead-acid batteries Cost saving: Save more than 40% of electricity, reduce management costs, and save battery storage space

The polyester tire with steel mesh can ensure that the forklift has sufficient driving force and good handling effect even on the frozen ground

Now we are promoting environmental protection everywhere

As efficient equipment for stacking, loading and unloading and short-distance transportation, they have greatly improved labor productivity and played an important role in economic development

BYD forklift solutions for the logistics industry with high-intensity handling: In the logistics industry, cargo loading and unloading is a relatively normal part of the work

, so as to avoid objects flying up and injuring people

The third reason is that the charging and discharging current is too large or long-term overcharging causes the electrolyte temperature to be too high

When using an explosion-proof electric forklift, you should pay attention to timely and correct operation, control the forklift's travel speed, and ensure safety

BYD CPD40 Warehouse forklifts Quote

The DC motor must be configured We recommend choosing a manufacturer with complete certificates and qualifications, which is more guaranteed

So how do we troubleshoot these faults? The following editor will give you a brief introduction

Electric Pallet Trucks Drive and Operation start 1

Make more comparisons and choose the one that suits you best and has the best cost-effectiveness

However, there are also some key points that need to be paid attention to during operation

There are many heavy goods with pallets in storage, which are heavy and expensive

When the vehicle is trudging, do not mistake the "Trudge" and "Evacuate" direction buttons for the turn buttons; 6

Through the accumulation of recent years, the product series has gradually enriched, the technical level has been continuously improved, and the products are sold well at home and abroad, leading a new trend in the industry

The overall design of the equipment conforms to ergonomics

, to ensure safety in explosion-proof environments

In applications that require very low noise, it is recommended to readjust the air gap within the maximum air gap range

, Hangcha Group Co

A heater should be installed in the cab

BYD CPD40 Warehouse forklifts Quote When adding water, it must not exceed the bottom of the distilled water bottle!!! 4 1

When cracks appear in the welding parts of the body of the electric pallet truck, secondary welding should be carried out in time

Mainly: 1

New Regulation Changes 2 Forklifts need to be equipped with safety monitoring devices

The battery pack can be replaced quickly: just put in a new battery to complete the entire charging process (about 10 minutes); 3 (5) When using a fork to pick up goods, the fork should be inserted as deep as possible under the load, and care should be taken that the fork tip does not touch other goods or objects However, since its development, electric forklifts have been subject to the bottleneck of batteries The above data refers to the "China Forklift Manufacturing Industry Production and Sales Demand Forecast and Transformation and Upgrading Analysis Report" by the Forward-looking Industry Research Institute

Considering the width of the forklift's operating channel, if you cannot purchase a high-cost reach forklift, you also need to consider whether to choose a three-wheel or four-wheel forklift

A heater should be installed in the cab

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info