精品国产麻豆,亚洲欧美偷拍三级,97久精品国产片一区二区三区

BYD four-wheel battery forklift maintenance and maintenance knowledge- When there are obstacles or pedestrians on the route, the vehicle will automatically stop or give way, reducing the bumps and damage associated with handling, ensuring that the materials are transported to the designated location in good condition, and greatly reducing the uncertainty caused by manual forklifts

Battery capacity: 80V/700Ah 5

are all protected to reduce the occurrence of faults

(5) Zero pollution: no heavy metal pollution during the production process; no pollution and no emissions during use; complies with RoHs environmental protection regulations; no acid mist is generated during the charging process of the angle sensor; used batteries can be recycled and reused

The electric transport truck manufacturer will tell us its use and function

2*1 Electric transport truck manufacturers remind that nine-legged or Sichuan-shaped pallets should be used, and double-sided Tian-shaped pallets cannot be used

It is understood that BYD forklifts provide customized logistics solutions for logistics companies

Check the hydraulic pump, oil pipe, joints and oil seals to see if there is any oil leakage

This section proposes solutions from the two aspects of mechanical structure and hydraulic system Battery forklifts are mostly used in indoor places such as warehouses, where the environment changes little, and the corrosion caused by environmental factors is relatively light

Based on the above problems, this paper proposes a design scheme for a narrow channel side stacking unmanned forklift (hereinafter referred to as unmanned forklift)

Models with fixed platforms are also available

BYD four-wheel battery forklift maintenance and maintenance knowledge- The operation and control of electric forklifts are simpler and more flexible5-5

Especially in the field of circuits and components, in order to reduce costs, manufacturers have introduced accessories of varying quality

(2) When a forklift encounters an obstacle, it should not force its way through

The electric hydraulic transport truck slowly moves away

The minimum ground clearance refers to the distance from the lowest point on the electric forklift body, excluding the wheels, to the ground At lower temperatures, higher relative humidity is allowed

The part structure is mainly used for the implementation of protection technology, and the process holes can be opened when necessary

There are many types of pallets on the market now

Use a jack to lift up the entire forklift, then place wood under it and pay attention to safety

When the gantry is retracted, the width of the operating channel is generally 2

When the bending and twisting deformation of the electric forklift mast is too large and it is difficult to correct it by cold pressing, it can be corrected by heating

BYD four-wheel battery forklift maintenance and maintenance knowledge-

The operator must understand the condition of the vehicle before using it, and must not allow unsupervised personnel to operate it at will; therefore, when using an electric transport truck, it is necessary to use it in a standard manner, and at the same time it is necessary to pay attention to its protection and maintenance to extend its service life

Rotate the travel button one after another to move the electric pallet truck backward

The double forks should be inserted in parallel, and the pallet should not be distorted for operation

The DC motor, therefore, the frequency characteristics of the motor will be reduced

Unmanned forklifts, also known as AGV handling robots, do not require manual driving, have high positioning accuracy, and effectively reduce labor intensity

Making sharp turns at high speeds can cause the vehicle to lose lateral stability and tip over

The lifting height of the electric forklift should be able to unload and shovel goods on the shelf The humidity of the buffer zone can be controlled with the help of a dehumidifier, or the temperature can be controlled by isolating the loading and unloading area to ensure a lower humidity

※ ACCIDENT ※ In emergency or dangerous situations ※ When welding Notice! When welding around the car body, the battery is easily damaged

The operator should maintain a wide field of vision when driving the counterbalanced forklift to avoid collision with obstacles

At the same time, more and more companies began to enter the field of electric forklifts, and made continuous breakthroughs and diversified innovations around the core technologies and products of electric forklifts, which promoted the further improvement of the level of domestic electric forklifts

Pay attention to safety when charging (check whether the wires and charging sockets are damaged, and use them only when they are intact, and leave only when everything is correct)

In addition, by optimizing the control strategy, adjusting the start-up stability of the drive wheel and the followability during sharp turns, it is ensured that the forklift will not slip even when driving on a wet and slippery indoor ground, and avoid overturning during sharp turns, effectively ensuring the safety of the operator

New energy forklift leader

Product

BYD Counterbalanced forklift

BYD Warehouse Forklift

BYD large tonnage forklift

BYD tractor truck

Core Features

High security

high performance

High efficiency

High Match

Low overall cost

Super fast charging

Ultra-long life

No charging room required

About Us

Product

BYD Forklift

Contact Info